Package libmodbus-devel

• libmodbus(7) — a fast and portable Modbus library
• modbus_close(3) — close a Modbus connection
• modbus_connect(3) — establish a Modbus connection
• modbus_flush(3) — flush non\-transmitted data
• modbus_free(3) — free a libmodbus context
• modbus_get_byte_from_bits(3) — get the value from many bits
• modbus_get_byte_timeout(3) — get timeout between bytes
• modbus_get_float(3) — get a float value from 2 registers
• modbus_get_float_abcd(3) — get a float value from 2 registers in ABCD byte order
• modbus_get_float_badc(3) — get a float value from 2 registers in BADC byte order
• modbus_get_float_cdab(3) — get a float value from 2 registers in CDAB byte order
• modbus_get_float_dcba(3) — get a float value from 2 registers in DCBA byte order
• modbus_get_header_length(3) — retrieve the current header length
• modbus_get_response_timeout(3) — get timeout for response
• modbus_get_slave(3) — get slave number in the context
• modbus_get_socket(3) — get the current socket of the context
• modbus_mapping_free(3) — free a modbus_mapping_t structure
• modbus_mapping_new(3) — allocate four arrays of bits and registers
• modbus_mapping_new_start_address(3) — allocate four arrays of bits and registers accessible from their starting addresses
• modbus_mask_write_register(3) — mask a single register
• modbus_new_rtu(3) — create a libmodbus context for RTU
• modbus_new_tcp(3) — create a libmodbus context for TCP/IPv4
• modbus_new_tcp_pi(3) — create a libmodbus context for TCP Protocol Independent
• modbus_read_bits(3) — read many bits
• modbus_read_input_bits(3) — read many input bits
• modbus_read_input_registers(3) — read many input registers
• modbus_read_registers(3) — read many registers
• modbus_receive(3) — receive an indication request
• modbus_receive_confirmation(3) — receive a confirmation request
• modbus_reply(3) — send a reponse to the received request
• modbus_reply_exception(3) — send an exception reponse
• modbus_report_slave_id(3) — returns a description of the controller
• modbus_rtu_get_rts(3) — get the current RTS mode in RTU
• modbus_rtu_get_rts_delay(3) — get the current RTS delay in RTU
• modbus_rtu_get_serial_mode(3) — get the current serial mode
• modbus_rtu_set_custom_rts(3) — set a function to be used for custom RTS implementation
• modbus_rtu_set_rts(3) — set the RTS mode in RTU
• modbus_rtu_set_rts_delay(3) — set the RTS delay in RTU
• modbus_rtu_set_serial_mode(3) — set the serial mode
• modbus_send_raw_request(3) — send a raw request
• modbus_set_bits_from_byte(3) — set many bits from a single byte value
• modbus_set_bits_from_bytes(3) — set many bits from an array of bytes
• modbus_set_byte_timeout(3) — set timeout between bytes
• modbus_set_debug(3) — set debug flag of the context
• modbus_set_error_recovery(3) — set the error recovery mode
• modbus_set_float(3) — set a float value from 2 registers
• modbus_set_float_abcd(3) — set a float value in 2 registers using ABCD byte order
• modbus_set_float_badc(3) — set a float value in 2 registers using BADC byte order
• modbus_set_float_cdab(3) — set a float value in 2 registers using CDAB byte order
• modbus_set_float_dcba(3) — set a float value in 2 registers using DCBA byte order
• modbus_set_response_timeout(3) — set timeout for response
• modbus_set_slave(3) — set slave number in the context
• modbus_set_socket(3) — set socket of the context
• modbus_strerror(3) — return the error message
• modbus_tcp_accept(3) — accept a new connection on a TCP Modbus socket (IPv4)
• modbus_tcp_listen(3) — create and listen a TCP Modbus socket (IPv4)
• modbus_tcp_pi_accept(3) — accept a new connection on a TCP PI Modbus socket (IPv6)
• modbus_tcp_pi_listen(3) — create and listen a TCP PI Modbus socket (IPv6)
• modbus_write_and_read_registers(3) — write and read many registers in a single transaction
• modbus_write_bit(3) — write a single bit
• modbus_write_bits(3) — write many bits
• modbus_write_register(3) — write a single register
• modbus_write_registers(3) — write many registers