manpages

mmgs(1)

MMGS(1) General Commands Manual MMGS(1)

NAME

mmgs — Adaptation and optimization of a surface triangulation representing a piecewise linear approximation of an underlying surface geometry.

SYNOPSIS

mmgs ⟨mesh_file⟩ [output_file] [-sol ⟨solution_file⟩] [-met ⟨metric_file⟩] [-h] [-v] [-m ⟨n⟩] [-d] [-val] [-default] [-A] [-ar ⟨x⟩ | -nr] [-hmin ⟨x⟩] [-hmax ⟨x⟩] [-hsiz ⟨x⟩] [-hausd ⟨x⟩] [-hgrad ⟨x⟩] [-hgradreq ⟨x⟩] [-A] [-ls x] [-keep-ref] [-nreg] [-noinsert] [-nomove] [-noswap] [-nosizreq] [-nreg] [-nsd] [-optim] [-rn ⟨n⟩]

DESCRIPTION

The mmgs application is dedicated to surface triangulation remeshing.

By default it performs mesh modifications in order to control the surface approximation.
Providing a metric file, it adapts the mesh to the prescribed sizes at nodes.
Providing a level-set file containing the values of the level-set function at the mesh nodes, the -ls option allows to explicitely mesh an implicit domain. -optim option allow to improve the mesh quality with respect to initial mesh size and the surface approximation respect.

COMMAND LINE ARGUMENTS

  1. Generic options:
    -h
    Print help.
    -v ⟨n⟩
    Tune level of verbosity.
    Takes values between -1 and 10.
    -m ⟨n⟩
    Set maximal memory size to n MBytes.
    -d
    Turn on debug mode.
    -default
    Write a local parameter file (with extension .mmgs) with setted values.
    -val
    Print the default parameters values.
  2. File specifications:
    -in ⟨mesh_file⟩
    Input triangulation.
    -out ⟨output_file⟩
    Output triangulation.
    -sol ⟨solution_file⟩
    Load metric or level-set file.
    -met ⟨metric_file⟩
    Load metric file in level-set mode.
  3. Mode specifications (default is mesh adaptation):
    -ls x
    Create mesh of isovalue x (0.0 if x is not provided).
  4. Parameters:
    -A
    Enable anisotropy (without metric file).
    -ar ⟨x⟩ | -nr
    Threshold for angle detection or sharp features detection disabling.
    -hmin ⟨x⟩
    Minimal mesh size.
    -hmax ⟨x⟩
    Maximal mesh size.
    -hsiz ⟨x⟩
    Constant mesh size.
    -hausd ⟨x⟩
    Control the Hausdorff distance to the underlying surface geometry.
    -hgrad ⟨x⟩
    Control the gradation.
    -hgradreq ⟨x⟩
    Control the gradation from required entities toward others.
    -keep-ref
    Preserve initial domain references when create the mesh of isovalue.
    -noinsert
    No point insertion/deletion.
    -nomove
    No point relocation
    -noswap
    No edge or face flipping.
    -nosizreq
    No imposition of the size of required edges over required vertices.
    -nreg
    Normal regularization using laplacian - antilaplacian smoothing.
    -nsd ⟨n⟩
    Save the subdomain of index n (default is n=0 which save all subdomains).
    -optim
    Mesh improvement with respect to the initial mesh size.
    -rn ⟨n⟩
    Turn on ( n=1 ) or off ( n=0 ) the renumbering using the SCOTCH library (only available with the USE_SCOTCH compilation flag and if the scotch library is founded).

RETURN VALUES

mmgs returns:

  • the 0 value if successful;
  • the 1 value if the process fail but we can save a conform mesh;
  • the 2 value if the process fail and we can't save a conform mesh.

SEE ALSO

mmg3d(1) mmg2d(1)

May 4, 2015 mmgs