dohell(1)
| DOHELL(1) | Xenomai Manual | DOHELL(1) |
NAME
dohell - Generate load, in parallel of the latency test
SYNOPSIS
dohell [ -b <path> ] [ -s <server> ] [ -p <port> ] [ -m <path> ] [ -l <path> | <duration> ]
DESCRIPTION
dohell generates some load, using commonly available commands, in parallel of the latency(1) test or as part of xeno-test(1).
OPTIONS
dohell accepts the following options:
-b
runs the hackbench test repetitively during the run-time
of the dohell script;
-s
run nc to continuously send data to a server through
network;
-p
if -s is used, specificy the port to which to send
data, if not specified, port 9 (aka discard) is used;
-m <path>
run dd to write data to the <path>
directory;
-l <path>
mutually exclusive with <duration>; the
dohell script runs during two runs of the LTP script runalltests.sh
found in the <path> directory;
<duration>
mutually exclusive with -l; run dohell for the
given duration in seconds.
SEE ALSO
xeno-test(1), latency(1).
EXAMPLE
dohell -s 192.168.0.5 -m /mnt -l /ltp
| 11/13/2021 | Xenomai 3.1.2 |