Package libknet-devel

• knet_addrtostr(3) — Convert an address to a host name.
• knet_get_compress_list(3) — Get a list of support compression types.
• knet_get_crypto_list(3) — Get a list of supported crypto libraries.
• knet_get_transport_id_by_name(3) — Get a transport ID from its name.
• knet_get_transport_list(3) — Get a list of the transports support by this build of knet.
• knet_get_transport_name_by_id(3) — Get a transport name from its ID number.
• knet_handle_add_datafd(3) — Install a file descriptor for communication.
• knet_handle_clear_stats(3) — Clear knet stats, link and/or handle.
• knet_handle_compress(3) — Set up packet compression.
• knet_handle_crypto(3) — set up packet cryptographic signing & encryption
• knet_handle_crypto_rx_clear_traffic(3) — enable or disable RX processing of clear (unencrypted) traffic
• knet_handle_crypto_set_config(3) — set up packet cryptographic signing & encryption
• knet_handle_crypto_use_config(3) — specify crypto configuration to use for TX
• knet_handle_enable_access_lists(3) — Enable or disable usage of access lists (default: off)
• knet_handle_enable_filter(3) — install a filter to route packets
• knet_handle_enable_pmtud_notify(3) — install a callback to receive PMTUd changes
• knet_handle_enable_sock_notify(3) — Register a callback to receive socket events.
• knet_handle_free(3) — Destroy a knet handle, free all resources.
• knet_handle_get_channel(3) — Get the channel associated with a file descriptor.
• knet_handle_get_datafd(3) — Get the file descriptor associated with a channel.
• knet_handle_get_stats(3) — Get statistics for compression & crypto.
• knet_handle_get_transport_reconnect_interval(3) — Get the interval between transport attempts to reconnect a failed link.
• knet_handle_new(3) — knet_handle_new_ex with flags = KNET_HANDLE_FLAG_PRIVILEGED.
• knet_handle_new_ex(3) — create a new instance of a knet handle
• knet_handle_pmtud_get(3) — Get the current data MTU.
• knet_handle_pmtud_getfreq(3) — Get the interval between PMTUd scans.
• knet_handle_pmtud_set(3) — Set the current interface MTU.
• knet_handle_pmtud_setfreq(3) — Set the interval between PMTUd scans.
• knet_handle_remove_datafd(3) — Remove a file descriptor from knet.
• knet_handle_set_transport_reconnect_interval(3) — Set the interval between transport attempts to reconnect a failed link.
• knet_handle_setfwd(3) — Start packet forwarding.
• knet_host_add(3) — Add a new host ID to knet.
• knet_host_enable_status_change_notify(3) — Install a callback to get host status change events.
• knet_host_get_host_list(3) — Get a list of hosts known to knet.
• knet_host_get_id_by_host_name(3) — Get the ID of a host given its name.
• knet_host_get_name_by_host_id(3) — Get the name of a host given its ID.
• knet_host_get_policy(3) — Get the switching policy for a host's links.
• knet_host_get_status(3) — Get the status of a host.
• knet_host_remove(3) — Remove a host ID from knet.
• knet_host_set_name(3) — Set the name of a knet host.
• knet_host_set_policy(3) — Set the switching policy for a host's links.
• knet_link_add_acl(3) — Add access list entry to an open link.
• knet_link_clear_acl(3) — Remove all access list entries from an open link.
• knet_link_clear_config(3) — Clear link information and disconnect the link.
• knet_link_get_config(3) — Get the link configutation information.
• knet_link_get_enable(3) — Find out whether a link is enabled or not.
• knet_link_get_link_list(3) — Get a list of links connecting a host.
• knet_link_get_ping_timers(3) — Get the ping timers for a link.
• knet_link_get_pong_count(3) — Get the pong count for a link.
• knet_link_get_priority(3) — Get the priority for a link.
• knet_link_get_status(3) — Get the status (and statistics) for a link.
• knet_link_insert_acl(3) — Insert access list entry to an open link at given index.
• knet_link_rm_acl(3) — Remove access list entry from an open link.
• knet_link_set_config(3) — Configure the link to a host.
• knet_link_set_enable(3) — Enable traffic on a link.
• knet_link_set_ping_timers(3) — Set the ping timers for a link.
• knet_link_set_pong_count(3) — Set the pong count for a link.
• knet_link_set_priority(3) — Set the priority for a link.
• knet_log_get_loglevel(3) — Get the logging level for a subsystem.
• knet_log_get_loglevel_id(3) — Get a logging level ID from its name.
• knet_log_get_loglevel_name(3) — Get a logging level name from its numeric ID.
• knet_log_get_subsystem_id(3) — Get a logging system ID from its name.
• knet_log_get_subsystem_name(3) — Get a logging system name from its numeric ID.
• knet_log_set_loglevel(3) — Set the logging level for a subsystem.
• knet_recv(3) — Receive data from knet nodes.
• knet_send(3) — Send data to knet nodes.
• knet_send_sync(3) — Synchronously send data to knet nodes.
• knet_strtoaddr(3) — Convert a hostname string to an address.