Package sg3_utils

• rescan-scsi-bus.sh(8) — script to add and remove SCSI devices without rebooting
• scsi_logging_level(8) — access Linux SCSI logging level information
• scsi_mandat(8) — check SCSI device support for mandatory commands
• scsi_readcap(8) — do SCSI READ CAPACITY command on disks
• scsi_ready(8) — do SCSI TEST UNIT READY on devices
• scsi_satl(8) — check SCSI to ATA Translation (SAT) device support
• scsi_start(8) — start one or more SCSI disks
• scsi_stop(8) — stop (spin down) one or more SCSI disks
• scsi_temperature(8) — fetch the temperature of a SCSI device
• sg3_utils(8) — a package of utilities for sending SCSI commands
• sg3_utils_json(8) — JSON output for some sg3_utils utilities
• sg_bg_ctl(8) — send SCSI BACKGROUND CONTROL command
• sg_compare_and_write(8) — send the SCSI COMPARE AND WRITE command
• sg_copy_results(8) — send SCSI RECEIVE COPY RESULTS command (XCOPY related)
• sg_dd(8) — copy data to and from files and devices, especially SCSI
• sg_decode_sense(8) — decode SCSI sense and related data
• sg_emc_trespass(8) — change ownership of SCSI LUN from another
• sg_format(8) — format, format with preset, resize SCSI disk; format tape
• sg_get_config(8) — send SCSI GET CONFIGURATION command (MMC\-4 +)
• sg_get_elem_status(8) — send SCSI GET PHYSICAL ELEMENT STATUS command
• sg_get_lba_status(8) — send SCSI GET LBA STATUS(16 or 32) command
• sg_ident(8) — send SCSI REPORT/SET IDENTIFYING INFORMATION command
• sg_inq(8) — issue SCSI INQUIRY command and/or decode its response
• sg_logs(8) — access log pages with SCSI LOG SENSE command
• sg_luns(8) — send SCSI REPORT LUNS command or decode given LUN
• sg_map(8) — displays mapping between Linux sg and other SCSI devices
• sg_map26(8) — map SCSI generic (sg) device to corresponding device names
• sg_modes(8) — reads mode pages with SCSI MODE SENSE command
• sg_opcodes(8) — report supported SCSI commands or task management functions
• sg_persist(8) — use SCSI PERSISTENT RESERVE command to access registrations
• sg_prevent(8) — send SCSI PREVENT ALLOW MEDIUM REMOVAL command
• sg_raw(8) — send arbitrary SCSI or NVMe command to a device
• sg_rbuf(8) — reads data using SCSI READ BUFFER command
• sg_rdac(8) — display or modify SCSI RDAC Redundant Controller mode page
• sg_read(8) — read multiple blocks of data, optionally with SCSI READ commands
• sg_read_attr(8) — send SCSI READ ATTRIBUTE command
• sg_read_block_limits(8) — send SCSI READ BLOCK LIMITS command
• sg_read_buffer(8) — send SCSI READ BUFFER command
• sg_read_long(8) — send a SCSI READ LONG command
• sg_readcap(8) — send SCSI READ CAPACITY command
• sg_reassign(8) — send SCSI REASSIGN BLOCKS command
• sg_referrals(8) — send SCSI REPORT REFERRALS command
• sg_rem_rest_elem(8) — send SCSI remove or restore element command
• sg_rep_density(8) — send SCSI REPORT DENSITY SUPPORT command
• sg_rep_pip(8) — send SCSI REPORT PROVISIONING INITIALIZATION PATTERN command
• sg_rep_zones(8) — send SCSI REPORT ZONES, REALMS or ZONE DOMAINS command
• sg_requests(8) — send one or more SCSI REQUEST SENSE commands
• sg_reset(8) — sends SCSI device, target, bus or host reset; or checks reset
• sg_reset_wp(8) — send SCSI RESET WRITE POINTER command
• sg_rmsn(8) — send SCSI READ MEDIA SERIAL NUMBER command
• sg_rtpg(8) — send SCSI REPORT TARGET PORT GROUPS command
• sg_safte(8) — access SCSI Accessed Fault\-Tolerant Enclosure (SAF\-TE) device
• sg_sanitize(8) — remove all user data from disk with SCSI SANITIZE command
• sg_sat_datetime(8) — report or set date and time on a ATA device
• sg_sat_identify(8) — send ATA IDENTIFY DEVICE command via SCSI to ATA
• sg_sat_phy_event(8) — use ATA READ LOG EXT via a SAT pass\-through to fetch
• sg_sat_read_gplog(8) — use ATA READ LOG EXT or SMART READ LOG command via
• sg_sat_set_features(8) — use ATA SET FEATURES command via a SCSI to ATA
• sg_scan(8) — scans sg devices (or SCSI/ATAPI/ATA devices) and prints
• sg_seek(8) — send SCSI SEEK, PRE-FETCH(10) or PRE-FETCH(16) command
• sg_senddiag(8) — performs a SCSI SEND DIAGNOSTIC command
• sg_ses(8) — access a SCSI Enclosure Services (SES) device
• sg_ses_microcode(8) — send microcode to a SCSI enclosure
• sg_start(8) — send SCSI START STOP UNIT command: start, stop, load or eject
• sg_stpg(8) — send SCSI SET TARGET PORT GROUPS command
• sg_stream_ctl(8) — send SCSI STREAM CONTROL or GET STREAM STATUS command
• sg_sync(8) — send SCSI SYNCHRONIZE CACHE command
• sg_test_rwbuf(8) — test a SCSI host adapter by issuing dummy writes
• sg_timestamp(8) — report or set timestamp on SCSI device
• sg_turs(8) — send one or more SCSI TEST UNIT READY commands
• sg_unmap(8) — send SCSI UNMAP command (known as 'trim' in ATA specs)
• sg_verify(8) — invoke SCSI VERIFY command(s) on a block device
• sg_vpd(8) — fetch SCSI VPD page and/or decode its response
• sg_wr_mode(8) — write (modify) SCSI mode page
• sg_write_attr(8) — send SCSI WRITE ATTRIBUTE command
• sg_write_buffer(8) — send SCSI WRITE BUFFER commands
• sg_write_long(8) — send SCSI WRITE LONG command
• sg_write_same(8) — send SCSI WRITE SAME command
• sg_write_verify(8) — send the SCSI WRITE AND VERIFY command
• sg_write_x(8) — SCSI WRITE normal/ATOMIC/SAME/SCATTERED/STREAM, ORWRITE commands
• sg_xcopy(8) — copy data to and from files and devices using SCSI EXTENDED
• sg_z_act_query(8) — send a SCSI ZONE ACTIVATE or ZONE QUERY command
• sg_zone(8) — send a SCSI ZONE modifying command
• sginfo(8) — access mode page information for a SCSI (or ATAPI) device
• sgm_dd(8) — copy data to and from files and devices, especially SCSI
• sgp_dd(8) — copy data to and from files and devices, especially SCSI