fence_virt(8)
| FENCE_AGENT(8) | System Manager's Manual | FENCE_AGENT(8) |
NAME
fence_virt - Fence agent for virtual machines
DESCRIPTION
fence_virt is a Power Fencing agent which can be used with virtual machines.
NOTE: reboot-action does not power on nodes that are powered off.
fence_virt accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_virt can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.
Vendor URL: https://libvirt.org
PARAMETERS
- -d
- Specify (stdin) or increment (command line) debug level
- -D
- Serial device (default=/dev/ttyS1) (Default Value: /dev/ttyS1)
- -P
- Serial Parameters (default=115200,8N1) (Default Value: 115200,8N1)
- -A
- VM Channel IP address (default=10.0.2.179) (Default Value: 10.0.2.179)
- -p
- TCP, Multicast, VMChannel, or VM socket port (default=1229) (Default Value: 1229)
- -n
- Virtual Machine (domain name) to fence This parameter is always required.
- -o
- Fencing action (null, off, on, [reboot], status, list, list-status, monitor, validate-all, metadata) (Default Value: reboot)
- -t
- Fencing timeout (in seconds; default=30) (Default Value: 30)
- -T
- IP address to connect to in TCP mode (default=127.0.0.1 / ::1) (Default Value: 127.0.0.1)
- -S
- vm socket CID to connect to in vsock mode (Default Value: 2)
- -C
- Authentication (none, sha1, [sha256], sha512) (Default Value: sha256)
- -c
- Packet hash strength (none, sha1, [sha256], sha512) (Default Value: sha256)
- -k
- Shared key file (default=/etc/cluster/fence_xvm.key) (Default Value: /etc/cluster/fence_xvm.key)
- -w
- Fencing delay (in seconds; default=0) (Default Value: 0)
ACTIONS
- null
-
The operational behavior of this is not known. - on
- Power on machine.
- off
- Power off machine.
- reboot
- Reboot machine.
- metadata
- Display the XML metadata describing this resource.
- status
- This returns the status of the plug/virtual machine.
- monitor
- Check the health of fence device
- list
- List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.
- list-status
- List available plugs with aliases/virtual machines and their power state if it can be obtained without additional commands.
- validate-all
- Validate if all required parameters are entered.
STDIN PARAMETERS
- debug
- Specify (stdin) or increment (command line) debug level
- serial_device
- Serial device (default=/dev/ttyS1) (Default Value: /dev/ttyS1)
- serial_params
- Serial Parameters (default=115200,8N1) (Default Value: 115200,8N1)
- channel_address
- VM Channel IP address (default=10.0.2.179) (Default Value: 10.0.2.179)
- ipport
- TCP, Multicast, VMChannel, or VM socket port (default=1229) (Default Value: 1229)
- plug
- Virtual Machine (domain name) to fence This parameter is always required. Obsoletes: port
- action
- Fencing action (null, off, on, [reboot], status, list, list-status, monitor, validate-all, metadata) (Default Value: reboot)
- timeout
- Fencing timeout (in seconds; default=30) (Default Value: 30)
- ipaddr
- IP address to connect to in TCP mode (default=127.0.0.1 / ::1) (Default Value: 127.0.0.1)
- vsock
- vm socket CID to connect to in vsock mode (Default Value: 2)
- auth
- Authentication (none, sha1, [sha256], sha512) (Default Value: sha256)
- hash
- Packet hash strength (none, sha1, [sha256], sha512) (Default Value: sha256)
- key_file
- Shared key file (default=/etc/cluster/fence_xvm.key) (Default Value: /etc/cluster/fence_xvm.key)
- delay
- Fencing delay (in seconds; default=0) (Default Value: 0)
| 2009-10-20 | fence_virt (Fence Agent) |