Package iproute2

• arpd(8) — userspace arp daemon.
• bridge(8) — show / manipulate bridge addresses and devices
• dcb(8) — show / manipulate DCB (Data Center Bridging) settings
• dcb-app(8) — show / manipulate application priority table of
• dcb-apptrust(8) — show / configure per-selector trust and trust order of the
• dcb-buffer(8) — show / manipulate port buffer settings of
• dcb-dcbx(8) — show / manipulate port DCBX (Data Center Bridging eXchange)
• dcb-ets(8) — show / manipulate ETS (Enhanced Transmission Selection) settings of
• dcb-maxrate(8) — show / manipulate port maxrate settings of
• dcb-pfc(8) — show / manipulate PFC (Priority-based Flow Control) settings of
• dcb-rewr(8) — show / manipulate the rewrite table of
• devlink(8) — Devlink tool
• devlink-dev(8) — devlink device configuration
• devlink-dpipe(8) — devlink dataplane pipeline visualization
• devlink-health(8) — devlink health reporting and recovery
• devlink-lc(8) — devlink line card configuration
• devlink-monitor(8) — state monitoring
• devlink-port(8) — devlink port configuration
• devlink-rate(8) — devlink rate management
• devlink-region(8) — devlink address region access
• devlink-resource(8) — devlink device resource configuration
• devlink-sb(8) — devlink shared buffer configuration
• devlink-trap(8) — devlink trap configuration
• genl(8) — generic netlink utility frontend
• ifstat(8) — handy utility to read network interface statistics
• ip(8) — show / manipulate routing, network devices, interfaces and tunnels
• ip-address(8) — protocol address management
• ip-addrlabel(8) — protocol address label management
• ip-fou(8) — Foo-over-UDP receive port configuration
• ip-ioam(8) — IPv6 In-situ OAM (IOAM)
• ip-l2tp(8)
• ip-link(8) — network device configuration
• ip-macsec(8) — MACsec device configuration
• ip-maddress(8) — multicast addresses management
• ip-monitor(8) — state monitoring
• ip-mptcp(8) — MPTCP path manager configuration
• ip-mroute(8) — multicast routing cache management
• ip-neighbour(8) — neighbour/arp tables management.
• ip-netconf(8) — network configuration monitoring
• ip-netns(8) — process network namespace management
• ip-nexthop(8) — nexthop object management
• ip-ntable(8)
• ip-route(8) — routing table management
• ip-rule(8) — routing policy database management
• ip-sr(8) — IPv6 Segment Routing management
• ip-stats(8) — manage and show interface statistics
• ip-tcp_metrics(8) — management for TCP Metrics
• ip-token(8) — tokenized interface identifier support
• ip-tunnel(8)
• ip-vrf(8) — run a command against a vrf
• ip-xfrm(8) — transform configuration
• lnstat(8) — unified linux network statistics
• netshaper(8) — show / manipulate network device hardware shaping configuration
• rdma(8) — RDMA tool
• rdma-dev(8) — RDMA device configuration
• rdma-link(8) — rdma link configuration
• rdma-monitor(8) — RDMA events monitoring
• rdma-resource(8) — rdma resource configuration
• rdma-statistic(8) — RDMA statistic counter configuration
• rdma-system(8) — RDMA subsystem configuration
• rtacct(8)
• rtmon(8) — listens to and monitors RTnetlink
• ss(8) — another utility to investigate sockets
• tc(8) — show / manipulate traffic control settings
• tc-actions(8) — independently defined actions in tc
• tc-basic(8) — basic traffic control filter
• tc-bfifo(8) — Packet limited First In, First Out queue
• tc-bpf(8) — BPF programmable classifier and actions for ingress/egress
• tc-cake(8) — Common Applications Kept Enhanced (CAKE)
• tc-cbs(8) — Credit Based Shaper (CBS) Qdisc
• tc-cgroup(8) — control group based traffic control filter
• tc-choke(8) — choose and keep scheduler
• tc-codel(8) — Controlled-Delay Active Queue Management algorithm
• tc-connmark(8)
• tc-csum(8)
• tc-ct(8) — tc connection tracking action
• tc-ctinfo(8) — tc connmark processing action
• tc-drr(8) — deficit round robin scheduler
• tc-dualpi2(8) — Dual Queue Proportional Integral Controller AQM - Improved with a square
• tc-ematch(8) — extended matches for use with basic, cgroup or flow filters
• tc-etf(8) — Earliest TxTime First (ETF) Qdisc
• tc-ets(8) — Enhanced Transmission Selection scheduler
• tc-flow(8) — flow based traffic control filter
• tc-flower(8) — flow based traffic control filter
• tc-fq(8) — Fair Queue traffic policing
• tc-fq_codel(8) — Fair Queuing (FQ) with Controlled Delay (CoDel)
• tc-fq_pie(8)
• tc-fw(8) — fwmark traffic control filter
• tc-gact(8)
• tc-gate(8) — Stream Gate Action
• tc-hfsc(7) — Hierarchical Fair Service Curve
• tc-hfsc(8) — Hierarchical Fair Service Curve's control under linux
• tc-htb(8) — Hierarchy Token Bucket
• tc-ife(8)
• tc-matchall(8) — traffic control filter that matches every packet
• tc-mirred(8)
• tc-mpls(8)
• tc-mqprio(8) — Multiqueue Priority Qdisc (Offloaded Hardware QOS)
• tc-nat(8)
• tc-netem(8) — Network Emulator
• tc-pedit(8)
• tc-pfifo_fast(8) — three-band first in, first out queue
• tc-pie(8) — Proportional Integral controller-Enhanced AQM algorithm
• tc-police(8)
• tc-prio(8) — Priority qdisc
• tc-red(8) — Random Early Detection
• tc-route(8) — route traffic control filter
• tc-sample(8)
• tc-sfb(8) — Stochastic Fair Blue
• tc-sfq(8) — Stochastic Fairness Queueing
• tc-simple(8)
• tc-skbedit(8)
• tc-skbmod(8)
• tc-skbprio(8) — SKB Priority Queue
• tc-stab(8) — Generic size table manipulations
• tc-taprio(8) — Time Aware Priority Shaper
• tc-tbf(8) — Token Bucket Filter
• tc-tunnel_key(8)
• tc-u32(8) — universal 32bit traffic control filter
• tc-vlan(8)
• tipc(8) — a TIPC configuration and management tool
• tipc-bearer(8) — show or modify TIPC bearers
• tipc-link(8) — show links or modify link properties
• tipc-media(8) — list or modify media properties
• tipc-nametable(8) — show TIPC nametable
• tipc-node(8) — modify and show local node parameters or list peer nodes
• tipc-peer(8) — modify peer information
• tipc-socket(8) — show TIPC socket (port) information
• vdpa(8) — vdpa management tool
• vdpa-dev(8) — vdpa device configuration
• vdpa-mgmtdev(8) — vdpa management device view