Package libnvme-devel

• nbft_control(2) — NBFT Table - Control Descriptor (Figure 8)
• nbft_control_flags(2) — Control Descriptor Flags
• nbft_desc_type(2) — NBFT Elements - Descriptor Types (Figure 5)
• nbft_discovery(2) — Discovery Descriptor (Figure 24)
• nbft_discovery_flags(2) — Discovery Descriptor Flags
• nbft_header(2) — NBFT Table - Header (Figure 8)
• nbft_heap_obj(2) — NBFT Header Driver Signature
• nbft_hfi(2) — Host Fabric Interface (HFI) Descriptor (Figure 11)
• nbft_hfi_flags(2) — HFI Descriptor Flags
• nbft_hfi_info_tcp(2) — HFI Transport Info Descriptor - NVMe/TCP (Figure 13)
• nbft_hfi_info_tcp_flags(2) — HFI Transport Flags
• nbft_host(2) — Host Descriptor (Figure 9)
• nbft_host_flags(2) — Host Flags
• nbft_info(2) — The parsed NBFT table data.
• nbft_info_discovery(2) — Discovery Descriptor
• nbft_info_hfi(2) — Host Fabric Interface (HFI) Descriptor
• nbft_info_hfi_info_tcp(2) — HFI Transport Info Descriptor - NVMe/TCP
• nbft_info_host(2) — Host Descriptor
• nbft_info_nid_type(2) — Namespace Identifier Type (NIDT)
• nbft_info_primary_admin_host_flag(2) — Primary Administrative Host Descriptor Flags
• nbft_info_security(2) — Security Profile Descriptor
• nbft_info_subsystem_ns(2) — Subsystem Namespace (SSNS) info
• nbft_security(2) — Security Profile Descriptor (Figure 21)
• nbft_security_flags(2) — Security Profile Descriptor Flags (Figure 22)
• nbft_security_secret_type(2) — Security Profile Descriptor Secret Type
• nbft_ssns(2) — Subsystem Namespace (SSNS) Descriptor (Figure 15)
• nbft_ssns_ext_info(2) — Subsystem and Namespace Extended Information Descriptor (Figure 19)
• nbft_ssns_ext_info_flags(2) — Subsystem and Namespace Extended Information Descriptor Flags
• nbft_ssns_flags(2) — Subsystem and Namespace Specific Flags Field (Figure 16)
• nbft_ssns_trflags(2) — SSNS Transport Specific Flags Field (Figure 17)
• nbft_trtype(2) — NBFT Interface Transport Types (Figure 7)
• nvme_acq(2) — This field indicates the admin completion queue base address
• nvme_admin_opcode(2) — Known NVMe admin opcodes
• nvme_admin_passthru(2) — Submit an nvme passthrough command
• nvme_admin_passthru64(2) — Submit a 64-bit nvme passthrough command
• nvme_ae_info_css_nvm(2) — Asynchronous Event Information - I/O Command Specific Status
• nvme_ae_info_error(2) — Asynchronous Event Information - Error Status
• nvme_ae_info_notice(2) — Asynchronous Event Information - Notice
• nvme_ae_info_smart(2) — Asynchronous Event Information - SMART / Health Status
• nvme_ae_type(2) — Asynchronous Event Type
• nvme_aggregate_endurance_group_event(2) — Endurance Group Event Aggregate
• nvme_aggregate_predictable_lat_event(2) — Predictable Latency Event Aggregate Log Page
• nvme_ana_group_desc(2) — ANA Group Descriptor
• nvme_ana_log(2) — Asymmetric Namespace Access Log
• nvme_ana_state(2) — ANA Group Descriptor - Asymmetric Namespace Access State
• nvme_apst_entry(2) — Autonomous Power State Transition
• nvme_aqa(2) — This field indicates the admin queue attributes
• nvme_asq(2) — This field indicates the admin submission queue base address
• nvme_ave_discover_log(2) — AVE Discovery Log
• nvme_ave_discover_log_entry(2) — AVE Discovery Log Entry
• nvme_ave_tr_record(2) — AVE Transport Record
• nvme_boot_partition(2) — Boot Partition Log
• nvme_boot_partition_info(2) — This field indicates the boot partition information
• nvme_bpinfo(2) — This field indicates the boot partition information
• nvme_bpmbl(2) — This field indicates the boot partition memory buffer location
• nvme_bprsel(2) — This field indicates the boot partition read select
• nvme_cap(2) — This field indicates the controller capabilities register
• nvme_capacity_config_desc(2) — Capacity Configuration structure definitions
• nvme_capacity_mgmt(2) — Capacity management command
• nvme_capacity_mgmt_args(2) — Arguments for the NVMe Capacity Management command
• nvme_cc(2) — This field indicates the controller configuration
• nvme_change_ns_event(2) — Change Namespace Event Data
• nvme_channel_config_desc(2) — Channel Configuration Descriptor
• nvme_clear_etdas(2) — Clear the Extended Telemetry Data Area 4 Supported bit
• nvme_cmb_size(2) — Calculate size of the controller memory buffer
• nvme_cmbebs(2) — This field indicates the controller memory buffer elasticity buffer size
• nvme_cmbloc(2) — This field indicates the controller memory buffer location
• nvme_cmbmsc(2) — This field indicates the controller memory buffer memory space control
• nvme_cmbsts(2) — This field indicates the controller memory buffer status
• nvme_cmbswtp(2) — This field indicates the controller memory buffer sustained write throughput
• nvme_cmbsz(2) — This field indicates the controller memory buffer size
• nvme_cmd_effects(2) — Commands Supported and Effects
• nvme_cmd_effects_log(2) — Commands Supported and Effects Log
• nvme_cmd_format_mset(2) — Format NVM - Metadata Settings
• nvme_cmd_format_pi(2) — Format NVM - Protection Information
• nvme_cmd_format_pil(2) — Format NVM - Protection Information Location
• nvme_cmd_format_ses(2) — Format NVM - Secure Erase Settings
• nvme_cmd_get_log_lid(2) — Get Log Page -Log Page Identifiers
• nvme_cmd_get_log_telemetry_host_lsp(2) — Telemetry Host-Initiated log specific field
• nvme_cmic(2) — This field indicates the controller multi-path I/O and NS sharing capabilities
• nvme_compare(2) — Submit an nvme user compare command
• nvme_connect_err(2) — nvme connect error codes
• nvme_constants(2) — A place to stash various constant nvme values
• nvme_copy(2) — Copy command
• nvme_copy_args(2) — Arguments for the NVMe Copy command
• nvme_copy_range(2) — Copy - Source Range Entries Descriptor Format
• nvme_copy_range_f1(2) — Copy - Source Range Entries Descriptor Format 1h
• nvme_copy_range_f2(2) — Copy - Source Range Entries Descriptor Format 2h
• nvme_copy_range_f3(2) — Copy - Source Range Entries Descriptor Format 3h
• nvme_copy_range_sopt(2) — NVMe Copy Range Source Options
• nvme_create_ctrl(2) — Allocate an unconnected NVMe controller
• nvme_create_root(2) — Initialize root object
• nvme_crto(2) — This field indicates the controller ready timeouts
• nvme_csi(2) — Defined command set indicators
• nvme_csts(2) — This field indicates the controller status register
• nvme_ctrl_config_match(2) — Check if ctrl @c matches config params
• nvme_ctrl_find(2) — Locate an existing controller
• nvme_ctrl_first_ns(2) — Start namespace iterator
• nvme_ctrl_first_path(2) — Start path iterator
• nvme_ctrl_for_each_ns(2) — Traverse namespaces
• nvme_ctrl_for_each_ns_safe(2) — Traverse namespaces
• nvme_ctrl_for_each_path(2) — Traverse paths
• nvme_ctrl_for_each_path_safe(2) — Traverse paths
• nvme_ctrl_get_address(2) — Address string of a controller
• nvme_ctrl_get_config(2) — Fabrics configuration of a controller
• nvme_ctrl_get_dhchap_host_key(2) — Return host key
• nvme_ctrl_get_dhchap_key(2) — Return controller key
• nvme_ctrl_get_fd(2) — Get associated file descriptor
• nvme_ctrl_get_firmware(2) — Firmware string of a controller
• nvme_ctrl_get_host_iface(2) — Host interface name of a controller
• nvme_ctrl_get_host_traddr(2) — Host transport address of a controller
• nvme_ctrl_get_keyring(2) — Return keyring
• nvme_ctrl_get_model(2) — Model of a controller
• nvme_ctrl_get_name(2) — sysfs name of a controller
• nvme_ctrl_get_numa_node(2) — NUMA node of a controller
• nvme_ctrl_get_phy_slot(2) — PCI physical slot number of a controller
• nvme_ctrl_get_queue_count(2) — Queue count of a controller
• nvme_ctrl_get_serial(2) — Serial number of a controller
• nvme_ctrl_get_sqsize(2) — SQ size of a controller
• nvme_ctrl_get_src_addr(2) — Extract src_addr from the c->address string
• nvme_ctrl_get_state(2) — Running state of a controller
• nvme_ctrl_get_subsysnqn(2) — Subsystem NQN of a controller
• nvme_ctrl_get_subsystem(2) — Parent subsystem of a controller
• nvme_ctrl_get_sysfs_dir(2) — sysfs directory of a controller
• nvme_ctrl_get_tls_key(2) — Return Derive TLS PSK
• nvme_ctrl_get_tls_key_identity(2) — Return Derive TLS Identity
• nvme_ctrl_get_traddr(2) — Transport address of a controller
• nvme_ctrl_get_transport(2) — Transport type of a controller
• nvme_ctrl_get_trsvcid(2) — Transport service identifier of a controller
• nvme_ctrl_identify(2) — Issues an 'identify controller' command
• nvme_ctrl_is_discovered(2) — Returns the value of the 'discovered' flag
• nvme_ctrl_is_discovery_ctrl(2) — Check the 'discovery_ctrl' flag
• nvme_ctrl_is_persistent(2) — Returns the value of the 'persistent' flag
• nvme_ctrl_is_unique_discovery_ctrl(2) — Check the 'unique_discovery_ctrl' flag
• nvme_ctrl_list(2) — Controller List
• nvme_ctrl_metadata_type(2) — Controller Metadata Element Types
• nvme_ctrl_next_ns(2) — Next namespace iterator
• nvme_ctrl_next_path(2) — Next path iterator
• nvme_ctrl_release_fd(2) — Close fd and clear fd from controller object
• nvme_ctrl_reset(2) — Initiate a controller reset
• nvme_ctrl_set_dhchap_host_key(2) — Set host key
• nvme_ctrl_set_dhchap_key(2) — Set controller key
• nvme_ctrl_set_discovered(2) — Set the 'discovered' flag
• nvme_ctrl_set_discovery_ctrl(2) — Set the 'discovery_ctrl' flag
• nvme_ctrl_set_keyring(2) — Set keyring
• nvme_ctrl_set_persistent(2) — Set the 'persistent' flag
• nvme_ctrl_set_tls_key(2) — Set Derive TLS PSK
• nvme_ctrl_set_tls_key_identity(2) — Set Derive TLS Identity
• nvme_ctrl_set_unique_discovery_ctrl(2) — Set the 'unique_discovery_ctrl' flag
• nvme_ctrls_filter(2) — Filter for controllers
• nvme_data_tfr(2) — Data transfer direction of the command
• nvme_default_host(2) — Initializes the default host
• nvme_describe_key_serial(2) — Return key description
• nvme_dev_self_test(2) — Start or abort a self test
• nvme_dev_self_test_args(2) — Arguments for the NVMe Device Self Test command
• nvme_dim_args(2) — Arguments for the Discovery Information Management (DIM) command
• nvme_directive_dtype(2) — Directive Types
• nvme_directive_receive_doper(2) — Directive Receive Directive Operation
• nvme_directive_recv(2) — Receive directive specific data
• nvme_directive_recv_args(2) — Arguments for the NVMe Directive Receive command
• nvme_directive_recv_identify_parameters(2) — Directive receive identifier parameters
• nvme_directive_recv_stream_allocate(2) — Directive receive stream allocate
• nvme_directive_recv_stream_parameters(2) — Directive receive stream parameters
• nvme_directive_recv_stream_status(2) — Directive receive stream status
• nvme_directive_send(2) — Send directive command
• nvme_directive_send_args(2) — Arguments for the NVMe Directive Send command
• nvme_directive_send_doper(2) — Directive Send Directive Operation
• nvme_directive_send_id_endir(2) — Directive Send Enable Directive
• nvme_directive_send_identify_endir(2) — Enable Directive
• nvme_directive_send_stream_release_identifier(2) — Directive Send Stream release
• nvme_directive_send_stream_release_resource(2) — Directive Send Stream release resources
• nvme_directive_types(2) — Directives Supported or Enabled
• nvme_disconnect_ctrl(2) — Disconnect a controller
• nvme_dispersed_ns_participating_nss_log(2) — Dispersed Namespace Participating NVM Subsystems Log
• nvme_dsm(2) — Send an nvme data set management command
• nvme_dsm_args(2) — Arguments for the NVMe Dataset Management command
• nvme_dsm_attributes(2) — Dataset Management attributes
• nvme_dsm_range(2) — Dataset Management - Range Definition
• nvme_dst_stc(2) — Action taken by the Device Self-test command
• nvme_dump_config(2) — Print the JSON configuration
• nvme_dump_tree(2) — Dump internal object tree
• nvme_eg_critical_warning_flags(2) — Endurance Group Information Log - Critical Warning
• nvme_eg_event_aggregate_log(2) — Endurance Group Event Aggregate
• nvme_end_grp_chan_desc(2) — Endurance Group Channel Configuration Descriptor
• nvme_end_grp_config_desc(2) — Endurance Group Configuration Descriptor
• nvme_endurance_group_log(2) — Endurance Group Information Log
• nvme_eom_lane_desc(2) — EOM Lane Descriptor
• nvme_eom_optional_data(2) — EOM Optional Data Present Fields (Deprecated)
• nvme_eom_optional_data_present(2) — EOM Optional Data Present Fields
• nvme_err_status_field(2) — This field indicates the error information log entry status field
• nvme_errno_to_string(2) — Returns string describing nvme connect failures
• nvme_error_log_page(2) — Error Information Log Entry (Log Identifier 01h)
• nvme_export_tls_key(2) — Export a TLS key
• nvme_export_tls_key_versioned(2) — Export a TLS pre-shared key
• nvme_fabrics_config(2) — Defines all linux nvme fabrics initiator options
• nvme_fabrics_uri(2) — Parsed URI structure
• nvme_fctype(2) — Fabrics Command Types
• nvme_fdp_config_desc(2) — FDP Configuration Descriptor
• nvme_fdp_config_fdpa(2) — FDP Attributes
• nvme_fdp_config_log(2) — FDP Configurations Log Page
• nvme_fdp_event(2) — FDP Event
• nvme_fdp_event_flags(2) — FDP Event Flags
• nvme_fdp_event_realloc(2) — Media Reallocated Event Type Specific Information
• nvme_fdp_event_realloc_flags(2) — Media Reallocated Event Type Specific Flags
• nvme_fdp_event_type(2) — FDP Event Types
• nvme_fdp_events_log(2) — FDP Events Log Page
• nvme_fdp_reclaim_unit_handle_status(2) — Get reclaim unit handle status
• nvme_fdp_reclaim_unit_handle_update(2) — Update a list of reclaim unit handles
• nvme_fdp_ruh_desc(2) — Reclaim Unit Handle Descriptor
• nvme_fdp_ruh_status(2) — Reclaim Unit Handle Status
• nvme_fdp_ruh_status_desc(2) — Reclaim Unit Handle Status Descriptor
• nvme_fdp_ruh_type(2) — Reclaim Unit Handle Type
• nvme_fdp_ruha(2) — Reclaim Unit Handle Attributes
• nvme_fdp_ruhu_desc(2) — Reclaim Unit Handle Usage Descriptor
• nvme_fdp_ruhu_log(2) — Reclaim Unit Handle Usage Log Page
• nvme_fdp_stats_log(2) — FDP Statistics Log Page
• nvme_fdp_supported_event_attributes(2) — Supported FDP Event Attributes
• nvme_fdp_supported_event_desc(2) — Supported FDP Event Descriptor
• nvme_feat(2) — Features Access Shifts/Masks values
• nvme_feat_auto_pst(2) — Autonomous Power State Transition
• nvme_feat_bpwp_state(2) — Boot Partition Write Protection State
• nvme_feat_fdp_events_cdw11(2) — FDP Events Feature Command Dword 11 Deprecated: doesn't support this struct. Use NVME_FEAT_FDPE_*** definitions instead.
• nvme_feat_host_behavior(2) — Host Behavior Support - Data Structure
• nvme_feat_nswpcfg_state(2) — Write Protection - Write Protection State
• nvme_feat_perfc_attri(2) — performance characteristics attribute index
• nvme_feat_perfc_r4karl(2) — standard performance attribute random 4 kib average latency
• nvme_feat_plm_window_select(2) — Predictable Latency Per NVM Set Log
• nvme_feat_resv_notify_flags(2) — Reservation Notification Configuration
• nvme_feat_tmpthresh_thsel(2) — Temperature Threshold - Threshold Type Select
• nvme_features_async_event_config_flags(2) — Asynchronous Event Configuration configuration flags
• nvme_features_id(2) — Features - Feature Identifiers
• nvme_fid_supported_effects(2) — FID Supported and Effects Data Structure definitions
• nvme_fid_supported_effects_log(2) — Feature Identifiers Supported and Effects
• nvme_firmware_slot(2) — Firmware Slot Information Log
• nvme_first_host(2) — Start host iterator
• nvme_first_subsystem(2) — Start subsystem iterator
• nvme_flbas(2) — This field indicates the formatted LBA size
• nvme_flush(2) — Send an nvme flush command
• nvme_for_each_host(2) — Traverse host list
• nvme_for_each_host_safe(2) — Traverse host list
• nvme_for_each_subsystem(2) — Traverse subsystems
• nvme_for_each_subsystem_safe(2) — Traverse subsystems
• nvme_format_nvm(2) — Format nvme namespace(s)
• nvme_format_nvm_args(2) — Arguments for the Format Nvme Namespace command
• nvme_format_nvm_compln_event(2) — Format NVM Completion Event Data
• nvme_format_nvm_start_event(2) — Format NVM Start Event Data
• nvme_free_ctrl(2) — Free controller
• nvme_free_host(2) — Free nvme_host_t object
• nvme_free_ns(2) — Free a namespace object
• nvme_free_subsystem(2) — Free a subsystem
• nvme_free_tree(2) — Free root object
• nvme_free_uri(2) — Free the URI structure
• nvme_fw_commit(2) — Commit firmware using the specified action
• nvme_fw_commit_args(2) — Arguments for the NVMe Firmware Commit command
• nvme_fw_commit_ca(2) — Firmware Commit - Commit Action
• nvme_fw_commit_event(2) — Firmware Commit Event Data
• nvme_fw_download(2) — Download part or all of a firmware image to the controller
• nvme_fw_download_args(2) — Arguments for the NVMe Firmware Download command
• nvme_fw_download_seq(2) — Firmware download sequence
• nvme_gen_dhchap_key(2) — DH-HMAC-CHAP key generation
• nvme_generate_tls_key_identity(2) — Generate the TLS key identity
• nvme_generate_tls_key_identity_compat(2) — Generate the TLS key identity
• nvme_get_ana_log_atomic(2) — Retrieve Asymmetric Namespace Access log page atomically
• nvme_get_ana_log_len(2) — Retrieve size of the current ANA log
• nvme_get_ana_log_len_from_id_ctrl(2) — Retrieve maximum possible ANA log size
• nvme_get_attr(2) — Read sysfs attribute
• nvme_get_ctrl_attr(2) — Read controller sysfs attribute
• nvme_get_ctrl_telemetry(2) — Get controller telemetry log
• nvme_get_directive_receive_length(2) — Get directive receive length
• nvme_get_discovery_args(2) — Arguments for nvmf_get_discovery_wargs()
• nvme_get_feature_length(2) — Retreive the command payload length for a specific feature identifier
• nvme_get_feature_length2(2) — Retreive the command payload length for a specific feature identifier
• nvme_get_features(2) — Retrieve a feature attribute
• nvme_get_features_arbitration(2) — Get arbitration feature
• nvme_get_features_args(2) — Arguments for the NVMe Admin Get Feature command
• nvme_get_features_async_event(2) — Get asynchronous event feature
• nvme_get_features_auto_pst(2) — Get autonomous power state feature
• nvme_get_features_data(2) — Helper function for @nvme_get_features()
• nvme_get_features_endurance_event_cfg(2) — Get endurance event config feature
• nvme_get_features_err_recovery(2) — Get error recovery feature
• nvme_get_features_err_recovery2(2) — Get error recovery feature
• nvme_get_features_hctm(2) — Get thermal management feature
• nvme_get_features_host_behavior(2) — Get host behavior feature
• nvme_get_features_host_id(2) — Get host id feature
• nvme_get_features_host_mem_buf(2) — Get host memory buffer feature
• nvme_get_features_host_mem_buf2(2) — Get host memory buffer feature
• nvme_get_features_iocs_profile(2) — Get IOCS profile feature
• nvme_get_features_irq_coalesce(2) — Get IRQ coalesce feature
• nvme_get_features_irq_config(2) — Get IRQ config feature
• nvme_get_features_kato(2) — Get keep alive timeout feature
• nvme_get_features_lba_range(2) — Get LBA range feature
• nvme_get_features_lba_range2(2) — Get LBA range feature
• nvme_get_features_lba_sts_interval(2) — Get LBA status information feature
• nvme_get_features_nopsc(2) — Get non-operational power state feature
• nvme_get_features_num_queues(2) — Get number of queues feature
• nvme_get_features_plm_config(2) — Get predictable latency feature
• nvme_get_features_plm_window(2) — Get window select feature
• nvme_get_features_power_mgmt(2) — Get power management feature
• nvme_get_features_resv_mask(2) — Get reservation mask feature
• nvme_get_features_resv_mask2(2) — Get reservation mask feature
• nvme_get_features_resv_persist(2) — Get reservation persist feature
• nvme_get_features_resv_persist2(2) — Get reservation persist feature
• nvme_get_features_rrl(2) — Get read recovery level feature
• nvme_get_features_sanitize(2) — Get sanitize feature
• nvme_get_features_sel(2) — Get Features - Select
• nvme_get_features_simple(2) — Helper function for @nvme_get_features()
• nvme_get_features_sw_progress(2) — Get software progress feature
• nvme_get_features_temp_thresh(2) — Get temperature threshold feature
• nvme_get_features_temp_thresh2(2) — Get temperature threshold feature
• nvme_get_features_timestamp(2) — Get timestamp feature
• nvme_get_features_volatile_wc(2) — Get volatile write cache feature
• nvme_get_features_write_atomic(2) — Get write atomic feature
• nvme_get_features_write_protect(2) — Get write protect feature
• nvme_get_host_telemetry(2) — Get host telemetry log
• nvme_get_lba_status(2) — Retrieve information on possibly unrecoverable LBAs
• nvme_get_lba_status_args(2) — Arguments for the NVMe Get LBA Status command
• nvme_get_lba_status_log(2) — Retrieve the LBA Status log page
• nvme_get_log(2) — NVMe Admin Get Log command
• nvme_get_log_ana(2) — Retrieve Asymmetric Namespace Access log page
• nvme_get_log_ana_groups(2) — Retrieve Asymmetric Namespace Access groups only log page
• nvme_get_log_args(2) — Arguments for the NVMe Admin Get Log command
• nvme_get_log_ave_discover(2) — Retrieve AVE Discovery Log
• nvme_get_log_boot_partition(2) — Retrieve Boot Partition
• nvme_get_log_changed_alloc_ns_list(2) — Retrieve Changed Allocated Namespace List Log
• nvme_get_log_changed_ns_list(2) — Retrieve namespace changed list
• nvme_get_log_cmd_effects(2) — Retrieve nvme command effects log
• nvme_get_log_create_telemetry_host(2) — Create host telemetry log
• nvme_get_log_create_telemetry_host_mcda(2) — Create host telemetry log
• nvme_get_log_device_self_test(2) — Retrieve the device self test log
• nvme_get_log_discovery(2) — Retrieve Discovery log page
• nvme_get_log_dispersed_ns_participating_nss(2) — Retrieve Dispersed Namespace Participating NVM Subsystems Log
• nvme_get_log_endurance_group(2) — Get Endurance Group log
• nvme_get_log_endurance_grp_evt(2) — Retrieve Endurance Group Event Aggregate
• nvme_get_log_error(2) — Retrieve nvme error log
• nvme_get_log_fdp_configurations(2) — Get list of Flexible Data Placement configurations
• nvme_get_log_fdp_events(2) — Get Flexible Data Placement events
• nvme_get_log_fdp_stats(2) — Get Flexible Data Placement statistics
• nvme_get_log_fid_supported_effects(2) — Retrieve Feature Identifiers Supported and Effects
• nvme_get_log_fw_slot(2) — Retrieves the controller firmware log
• nvme_get_log_host_discover(2) — Retrieve Host Discovery Log
• nvme_get_log_lba_status(2) — Retrieve LBA Status
• nvme_get_log_lockdown(2) — Retrieve lockdown Log
• nvme_get_log_media_unit_stat(2) — Retrieve Media Unit Status
• nvme_get_log_mgmt_addr_list(2) — Retrieve Management Address List Log
• nvme_get_log_mi_cmd_supported_effects(2) — displays the MI Commands Supported by the controller
• nvme_get_log_page(2) — Get log page data
• nvme_get_log_persistent_event(2) — Retrieve Persistent Event Log
• nvme_get_log_phy_rx_eom(2) — Retrieve Physical Interface Receiver Eye Opening Measurement Log
• nvme_get_log_predictable_lat_event(2) — Retrieve Predictable Latency Event Aggregate Log Page
• nvme_get_log_predictable_lat_nvmset(2) — Predictable Latency Per NVM Set
• nvme_get_log_pull_model_ddc_req(2) — Retrieve Pull Model DDC Request Log
• nvme_get_log_reachability_associations(2) — Retrieve Reachability Associations Log
• nvme_get_log_reachability_groups(2) — Retrieve Reachability Groups Log
• nvme_get_log_reclaim_unit_handle_usage(2) — Get reclaim unit handle usage
• nvme_get_log_reservation(2) — Retrieve Reservation Notification
• nvme_get_log_rotational_media_info(2) — Retrieve Rotational Media Information Log
• nvme_get_log_sanitize(2) — Retrieve Sanitize Status
• nvme_get_log_smart(2) — Retrieve nvme smart log
• nvme_get_log_support_cap_config_list(2) — Retrieve Supported Capacity Configuration List
• nvme_get_log_supported_log_pages(2) — Retrieve nmve supported log pages
• nvme_get_log_telemetry_ctrl(2) — Get Telemetry Controller-Initiated log page
• nvme_get_log_telemetry_host(2) — Get Telemetry Host-Initiated log page
• nvme_get_log_zns_changed_zones(2) — Retrieve list of zones that have changed
• nvme_get_logging_level(2) — Get current logging level
• nvme_get_logical_block_size(2) — Retrieve block size
• nvme_get_new_host_telemetry(2) — Get new host telemetry log
• nvme_get_ns_attr(2) — Read namespace sysfs attribute
• nvme_get_nsid(2) — Retrieve the NSID from a namespace file descriptor
• nvme_get_path_attr(2) — Read path sysfs attribute
• nvme_get_property(2) — Get a controller property
• nvme_get_property_args(2) — Arguments for NVMe Get Property command
• nvme_get_subsys_attr(2) — Read subsystem sysfs attribute
• nvme_get_telemetry_log(2) — Get specified telemetry log
• nvme_get_telemetry_max(2) — Get telemetry limits
• nvme_hmac_alg(2) — HMAC algorithm
• nvme_host_behavior_support(2) — Enable Advanced Command
• nvme_host_discover_log(2) — Host Discovery Log
• nvme_host_ext_discover_log(2) — Host Extended Discovery Log
• nvme_host_get_dhchap_key(2) — Return host key
• nvme_host_get_hostid(2) — Host ID of an nvme_host_t object
• nvme_host_get_hostnqn(2) — Host NQN of an nvme_host_t object
• nvme_host_get_hostsymname(2) — Get the host's symbolic name
• nvme_host_get_root(2) — Returns nvme_root_t object
• nvme_host_is_pdc_enabled(2) — Is Persistenct Discovery Controller enabled
• nvme_host_mem_buf_attrs(2) — Host Memory Buffer - Attributes Data Structure
• nvme_host_metadata(2) — Host Metadata Data Structure
• nvme_host_release_fds(2) — Close all opened file descriptors under host
• nvme_host_set_dhchap_key(2) — set host key
• nvme_host_set_hostsymname(2) — Set the host's symbolic name
• nvme_host_set_pdc_enabled(2) — Set Persistent Discovery Controller flag
• nvme_id_ctrl(2) — Identify Controller data structure
• nvme_id_ctrl_anacap(2) — This field indicates the capabilities associated with Asymmetric Namespace Access Reporting.
• nvme_id_ctrl_apsta(2) — Flags indicating the attributes of the autonomous power state transition feature.
• nvme_id_ctrl_avscc(2) — Flags indicating the configuration settings for Admin Vendor Specific command handling.
• nvme_id_ctrl_bpcap(2) — Boot Partition Capabilities
• nvme_id_ctrl_cmic(2) — Controller Multipath IO and Namespace Sharing Capabilities of the controller and NVM subsystem.
• nvme_id_ctrl_cntrltype(2) — Controller types
• nvme_id_ctrl_cqes(2) — Defines the required and maximum Completion Queue entry size when using the NVM Command Set.
• nvme_id_ctrl_crcap(2) — Power Loss Signaling Information
• nvme_id_ctrl_ctratt(2) — Controller attributes
• nvme_id_ctrl_dctype(2) — Discovery Controller types
• nvme_id_ctrl_dsto(2) — Flags indicating the optional Device Self-test command or operation behaviors supported by the controller or NVM subsystem.
• nvme_id_ctrl_fcatt(2) — This field indicates attributes of the controller that are specific to NVMe over Fabrics.
• nvme_id_ctrl_fna(2) — This field indicates attributes for the Format NVM command.
• nvme_id_ctrl_frmw(2) — Flags and values indicates capabilities regarding firmware updates from &struct nvme_id_ctrl.frmw.
• nvme_id_ctrl_fuses(2) — This field indicates the fused operations that the controller supports.
• nvme_id_ctrl_hctm(2) — Flags indicate the attributes of the host controlled thermal management feature
• nvme_id_ctrl_kpioc(2) — Key Per I/O Capabilities
• nvme_id_ctrl_lpa(2) — Flags indicating optional attributes for log pages that are accessed via the Get Log Page command.
• nvme_id_ctrl_mec(2) — Flags indicating the capabilities of the Management Endpoint in the Controller, &struct nvme_id_ctrl.mec.
• nvme_id_ctrl_nvm(2) — I/O Command Set Specific Identify Controller data structure
• nvme_id_ctrl_nvm_lbamqf(2) — LBA Migration Queue Format
• nvme_id_ctrl_nvmsr(2) — This field reports information associated with the NVM Subsystem, see &struct nvme_id_ctrl.nvmsr.
• nvme_id_ctrl_nvscc(2) — This field indicates the configuration settings for NVM Vendor Specific command handling.
• nvme_id_ctrl_nwpc(2) — This field indicates the optional namespace write protection capabilities supported by the controller.
• nvme_id_ctrl_oacs(2) — Flags indicating the optional Admin commands and features supported by the controller, see &struct nvme_id_ctrl.oacs.
• nvme_id_ctrl_oaes(2) — Optional Asynchronous Events Supported
• nvme_id_ctrl_ofcs(2) — Indicate whether the controller supports optional fabric commands.
• nvme_id_ctrl_oncs(2) — This field indicates the optional NVM commands and features supported by the controller.
• nvme_id_ctrl_plsi(2) — Power Loss Signaling Information
• nvme_id_ctrl_rpmbs(2) — This field indicates if the controller supports one or more Replay Protected Memory Blocks, from &struct nvme_id_ctrl.rpmbs.
• nvme_id_ctrl_sanicap(2) — Indicates attributes for sanitize operations.
• nvme_id_ctrl_sgls(2) — This field indicates if SGLs are supported for the NVM Command Set and the particular SGL types supported.
• nvme_id_ctrl_sqes(2) — Defines the required and maximum Submission Queue entry size when using the NVM Command Set.
• nvme_id_ctrl_trattr(2) — Tracking Attributes
• nvme_id_ctrl_vwc(2) — Volatile write cache
• nvme_id_ctrl_vwci(2) — This field indicates information about remaining number of times that VPD contents are able to be updated using the VPD Write command, see &struct nvme_id_ctrl.vwci.
• nvme_id_directives(2) — Identify Directive - Return Parameters Data Structure
• nvme_id_domain_attr(2) — Domain Attributes Entry
• nvme_id_domain_list(2) — Domain List
• nvme_id_endurance_group_list(2) — Endurance Group List
• nvme_id_independent_id_ns(2) — Identify - I/O Command Set Independent Identify Namespace Data Structure
• nvme_id_iocs(2) — NVMe Identify IO Command Set data structure
• nvme_id_iocs_iocsc(2) — This field indicates the Identify I/O Command Set Data Structure
• nvme_id_ns(2) — Identify Namespace data structure
• nvme_id_ns_attr(2) — Specifies attributes of the namespace.
• nvme_id_ns_dlfeat(2) — This field indicates information about features that affect deallocating logical blocks for this namespace.
• nvme_id_ns_dpc(2) — This field indicates the capabilities for the end-to-end data protection feature.
• nvme_id_ns_dps(2) — This field indicates the Type settings for the end-to-end data protection feature.
• nvme_id_ns_flbas(2) — This field indicates the LBA data size & metadata size combination that the namespace has been formatted with
• nvme_id_ns_granularity_desc(2) — Namespace Granularity Descriptor
• nvme_id_ns_granularity_list(2) — Namespace Granularity List
• nvme_id_ns_mc(2) — This field indicates the capabilities for metadata.
• nvme_id_ns_nmic(2) — This field specifies multi-path I/O and namespace sharing capabilities of the namespace.
• nvme_id_ns_rescap(2) — This field indicates the reservation capabilities of the namespace.
• nvme_id_nsfeat(2) — This field defines features of the namespace.
• nvme_id_nvmset_list(2) — NVM set list
• nvme_id_psd(2) — Power Management data structure
• nvme_id_uuid(2) — Identifier Association
• nvme_id_uuid_list(2) — UUID list
• nvme_id_uuid_list_entry(2) — UUID List Entry
• nvme_identify(2) — Send the NVMe Identify command
• nvme_identify_active_ns_list(2) — Retrieves active namespaces id list
• nvme_identify_active_ns_list_csi(2) — Active namespace ID list associated with a specified I/O command set
• nvme_identify_allocated_ns(2) — Same as nvme_identify_ns, but only for allocated namespaces
• nvme_identify_allocated_ns_list(2) — Retrieves allocated namespace id list
• nvme_identify_allocated_ns_list_csi(2) — Allocated namespace ID list associated with a specified I/O command set
• nvme_identify_args(2) — Arguments for the NVMe Identify command
• nvme_identify_cns(2) — Identify - CNS Values
• nvme_identify_ctrl(2) — Retrieves nvme identify controller
• nvme_identify_ctrl_csi(2) — I/O command set specific Identify Controller data
• nvme_identify_ctrl_list(2) — Retrieves identify controller list
• nvme_identify_domain_list(2) — Domain list data
• nvme_identify_endurance_group_list(2) — Endurance group list data
• nvme_identify_independent_identify_ns(2) — I/O command set independent Identify namespace data
• nvme_identify_iocs(2) — I/O command set data structure
• nvme_identify_iocs_ns_csi_user_data_format(2) — Identify I/O command set namespace data structure
• nvme_identify_ns(2) — Retrieves nvme identify namespace
• nvme_identify_ns_csi(2) — I/O command set specific identify namespace data
• nvme_identify_ns_csi_user_data_format(2) — Identify namespace user data format
• nvme_identify_ns_descs(2) — Retrieves namespace descriptor list
• nvme_identify_ns_granularity(2) — Retrieves namespace granularity identification
• nvme_identify_nsid_ctrl_list(2) — Retrieves controller list attached to an nsid
• nvme_identify_nvmset_list(2) — Retrieves NVM Set List
• nvme_identify_primary_ctrl(2) — Retrieve NVMe Primary Controller identification
• nvme_identify_secondary_ctrl_list(2) — Retrieves secondary controller list
• nvme_identify_uuid(2) — Retrieves device's UUIDs
• nvme_import_tls_key(2) — Import a TLS key
• nvme_import_tls_key_versioned(2) — Import a TLS key
• nvme_init_copy_range(2) — Constructs a copy range structure
• nvme_init_copy_range_f1(2) — Constructs a copy range f1 structure
• nvme_init_copy_range_f2(2) — Constructs a copy range f2 structure
• nvme_init_copy_range_f3(2) — Constructs a copy range f3 structure
• nvme_init_ctrl(2) — Initialize nvme_ctrl_t object for an existing controller.
• nvme_init_ctrl_list(2) — Initialize an nvme_ctrl_list structure from an array.
• nvme_init_default_logging(2) — Initialize default (fallback) logging
• nvme_init_dsm_range(2) — Constructs a data set range structure
• nvme_init_logging(2) — Initialize logging
• nvme_insert_tls_key(2) — Derive and insert TLS key
• nvme_insert_tls_key_compat(2) — Derive and insert TLS key
• nvme_insert_tls_key_versioned(2) — Derive and insert TLS key
• nvme_io(2) — Submit an nvme user I/O command
• nvme_io_args(2) — Arguments for NVMe I/O commands
• nvme_io_control_flags(2) — I/O control flags
• nvme_io_dsm_flags(2) — Dataset Management flags
• nvme_io_mgmt_recv(2) — I/O Management Receive command
• nvme_io_mgmt_recv_args(2) — Arguments for the NVMe I/O Management Receive command
• nvme_io_mgmt_recv_mo(2) — I/O Management Receive - Management Operation
• nvme_io_mgmt_send(2) — I/O Management Send command
• nvme_io_mgmt_send_args(2) — Arguments for the NVMe I/O Management Send command
• nvme_io_mgmt_send_mo(2) — I/O Management Send - Management Operation
• nvme_io_opcode(2) — Opcodes for I/O Commands
• nvme_io_passthru(2) — Submit an nvme io passthrough command
• nvme_io_passthru64(2) — Submit an nvme io passthrough command
• nvme_is_64bit_reg(2) — Checks if offset of the controller register is a know 64bit value.
• nvme_kv_opcode(2) — Opcodes for KV Commands
• nvme_lba_range_type(2) — LBA Range Type
• nvme_lba_range_type_entry(2) — LBA Range Type - Data Structure Entry
• nvme_lba_rd(2) — LBA Range Descriptor
• nvme_lba_status(2) — LBA Status Descriptor List
• nvme_lba_status_atype(2) — Action type the controller uses to return LBA status
• nvme_lba_status_cmpc(2) — Get LBA Status Command Completion Condition
• nvme_lba_status_desc(2) — LBA Status Descriptor Entry
• nvme_lba_status_log(2) — LBA Status Information Log
• nvme_lbaf(2) — LBA Format Data Structure
• nvme_lbaf_rp(2) — This field indicates the relative performance of the LBA format indicated relative to other LBA formats supported by the controller.
• nvme_lbart(2) — LBA Range Type - Data Structure Entry
• nvme_lbas_ns_element(2) — LBA Status Log Namespace Element
• nvme_lm_cdq(2) — Controller Data Queue - Controller Data Queue command
• nvme_lm_cdq_args(2) — Arguments for Controller Data Queue (CDQ) command
• nvme_lm_cdq_fields(2) — Controller Data Queue command fields
• nvme_lm_controller_state_data(2) — Controller State data structure contains data on the controller's state.
• nvme_lm_controller_state_data_header(2) — Controller State data header structure describes the contents of the Controller State data
• nvme_lm_ctrl_data_queue_fid(2) — Controller Data Queue - Set Feature
• nvme_lm_ctrl_data_queue_fid_data(2) — Get Controller Data Queue feature data
• nvme_lm_io_completion_queue_data(2) — I/O Completion Queue data structure. Fields related to the contents of Create I/O Completion Queue command that created an I/O Completion Queue.
• nvme_lm_io_submission_queue_data(2) — I/O Submission Queue data structure. Fields related to the contents of Create I/O Submission Queue command that created an I/O Submission Queue.
• nvme_lm_migration_recv_args(2) — Arguments for the Migration Receive command
• nvme_lm_migration_recv_fields(2) — Migration Receive command fields
• nvme_lm_migration_send(2) — Migration Send command
• nvme_lm_migration_send_args(2) — Arguments for the Migration Send command
• nvme_lm_migration_send_fields(2) — Migration Send command fields
• nvme_lm_nvme_controller_state_data(2) — NVMe Controller State data structure describes the state of a NVMe Controller's I/O Submission and I/O Completion queues
• nvme_lm_nvme_controller_state_data_header(2) — Controller State data structure header
• nvme_lm_queue_attributes(2) — I/O Submission and I/O Completion Queue Attributes
• nvme_lm_track_send(2) — Track Send command
• nvme_lm_track_send_args(2) — Arguments for the Track Send command
• nvme_lm_track_send_fields(2) — Track Send command fields
• nvme_lockdown(2) — Issue lockdown command
• nvme_lockdown_args(2) — Arguments for the NVME Lockdown command
• nvme_lockdown_log(2) — Command and Feature Lockdown Log
• nvme_lockdown_log_contents(2) — lockdown log page content attributes
• nvme_lockdown_log_scope(2) — lockdown log page scope attributes
• nvme_lockdown_scope_contents(2) — Lockdown Log shift and mask
• nvme_log_ana_lsp(2) — Asymmetric Namespace Access - Return Groups Only
• nvme_log_phy_rx_eom_action(2) — Physical Interface Receiver Eye Opening Measurement Action
• nvme_log_phy_rx_eom_quality(2) — Physical Interface Receiver Eye Opening Measurement Quality
• nvme_lookup_ctrl(2) — Lookup nvme_ctrl_t object
• nvme_lookup_host(2) — Lookup nvme_host_t object
• nvme_lookup_key(2) — Lookup key serial number
• nvme_lookup_keyring(2) — Lookup keyring serial number
• nvme_lookup_subsystem(2) — Lookup nvme_subsystem_t object
• nvme_media_unit_config_desc(2) — Media Unit Configuration Descriptor
• nvme_media_unit_stat_desc(2) — Media Unit Status Descriptor
• nvme_media_unit_stat_log(2) — Media Unit Status
• nvme_metadata_element_desc(2) — Metadata Element Descriptor
• nvme_mgmt_addr_desc(2) — Management Address Descriptor
• nvme_mgmt_addr_list_log(2) — Management Address List Log
• nvme_mi_admin_admin_passthru(2) — Submit an nvme admin passthrough command
• nvme_mi_admin_format_nvm(2) — Format NVMe namespace
• nvme_mi_admin_fw_commit(2) — Commit firmware using the specified action
• nvme_mi_admin_fw_download(2) — Download part or all of a firmware image to the controller
• nvme_mi_admin_get_ana_log_atomic(2) — Retrieve Asymmetric Namespace Access log page atomically
• nvme_mi_admin_get_endgid_log(2) — Helper for Get Endurance Group ID Log Page functions
• nvme_mi_admin_get_features_arbitration(2) — Get arbitration feature
• nvme_mi_admin_get_features_data(2) — Helper function for &nvme_mi_admin_get_features()
• nvme_mi_admin_get_features_power_mgmt(2) — Get power management feature
• nvme_mi_admin_get_log(2) — Retrieve log page data from controller
• nvme_mi_admin_get_log_ana(2) — Retrieve Asymmetric Namespace Access log page
• nvme_mi_admin_get_log_ana_groups(2) — Retrieve Asymmetric Namespace Access groups only log page
• nvme_mi_admin_get_log_ave_discover(2) — Retrieve AVE Discovery Log
• nvme_mi_admin_get_log_boot_partition(2) — Retrieve Boot Partition
• nvme_mi_admin_get_log_changed_alloc_ns_list(2) — Retrieve Changed Allocated Namespace List Log
• nvme_mi_admin_get_log_changed_ns_list(2) — Retrieve namespace changed list
• nvme_mi_admin_get_log_cmd_effects(2) — Retrieve nvme command effects log
• nvme_mi_admin_get_log_create_telemetry_host(2) — Create host telemetry log
• nvme_mi_admin_get_log_create_telemetry_host_mcda(2) — Create host telemetry log
• nvme_mi_admin_get_log_device_self_test(2) — Retrieve the device self test log
• nvme_mi_admin_get_log_discovery(2) — Retrieve Discovery log page
• nvme_mi_admin_get_log_dispersed_ns_participating_nss(2) — Retrieve Dispersed Namespace Participating NVM Subsystems Log
• nvme_mi_admin_get_log_endurance_group(2) — Get Endurance Group log
• nvme_mi_admin_get_log_endurance_grp_evt(2) — Retrieve Rotational Media Information
• nvme_mi_admin_get_log_error(2) — Retrieve nvme error log
• nvme_mi_admin_get_log_fid_supported_effects(2) — Retrieve Feature Identifiers Supported and Effects
• nvme_mi_admin_get_log_fw_slot(2) — Retrieves the controller firmware log
• nvme_mi_admin_get_log_host_discover(2) — Retrieve Host Discovery Log
• nvme_mi_admin_get_log_lba_status(2) — Retrieve LBA Status
• nvme_mi_admin_get_log_lockdown(2) — Retrieve lockdown Log
• nvme_mi_admin_get_log_media_unit_stat(2) — Retrieve Media Unit Status
• nvme_mi_admin_get_log_mgmt_addr_list(2) — Retrieve Management Address List Log
• nvme_mi_admin_get_log_mi_cmd_supported_effects(2) — displays the MI Commands Supported by the controller
• nvme_mi_admin_get_log_page(2) — Retrieve log page data from controller
• nvme_mi_admin_get_log_persistent_event(2) — Retrieve Persistent Event Log
• nvme_mi_admin_get_log_phy_rx_eom(2) — Retrieve Physical Interface Receiver Eye Opening Measurement Log
• nvme_mi_admin_get_log_predictable_lat_event(2) — Retrieve Predictable Latency Event Aggregate Log Page
• nvme_mi_admin_get_log_predictable_lat_nvmset(2) — Predictable Latency Per NVM Set
• nvme_mi_admin_get_log_pull_model_ddc_req(2) — Retrieve Pull Model DDC Request Log
• nvme_mi_admin_get_log_reachability_associations(2) — Retrieve Reachability Associations Log
• nvme_mi_admin_get_log_reachability_groups(2) — Retrieve Reachability Groups Log
• nvme_mi_admin_get_log_reservation(2) — Retrieve Reservation Notification
• nvme_mi_admin_get_log_rotational_media_info(2) — Retrieve Rotational Media Information Log
• nvme_mi_admin_get_log_sanitize(2) — Retrieve Sanitize Status
• nvme_mi_admin_get_log_simple(2) — Helper for Get Log Page functions with no NSID or RAE requirements
• nvme_mi_admin_get_log_smart(2) — Retrieve nvme smart log
• nvme_mi_admin_get_log_support_cap_config_list(2) — Retrieve Supported Capacity Configuration List
• nvme_mi_admin_get_log_supported_log_pages(2) — Retrieve nmve supported log pages
• nvme_mi_admin_get_log_telemetry_ctrl(2) — Get Telemetry Controller-Initiated log page
• nvme_mi_admin_get_log_telemetry_host(2) — Get Telemetry Host-Initiated log page
• nvme_mi_admin_get_log_zns_changed_zones(2) — Retrieve list of zones that have changed
• nvme_mi_admin_get_nsid_log(2) — Helper for Get Log Page functions
• nvme_mi_admin_identify(2) — Perform an Admin identify command.
• nvme_mi_admin_identify_active_ns_list(2) — Perform an Admin identify for an active namespace list
• nvme_mi_admin_identify_allocated_ns(2) — Perform an Admin identify command for an allocated namespace
• nvme_mi_admin_identify_allocated_ns_list(2) — Perform an Admin identify for an allocated namespace list
• nvme_mi_admin_identify_cns_nsid(2) — Perform an Admin identify command using specific CNS/NSID parameters.
• nvme_mi_admin_identify_ctrl(2) — Perform an Admin identify for a controller
• nvme_mi_admin_identify_ctrl_list(2) — Perform an Admin identify for a controller list.
• nvme_mi_admin_identify_ns(2) — Perform an Admin identify command for a namespace
• nvme_mi_admin_identify_ns_descs(2) — Perform an Admin identify Namespace Identification Descriptor list command for a namespace
• nvme_mi_admin_identify_nsid_ctrl_list(2) — Perform an Admin identify for a controller list with specific namespace ID
• nvme_mi_admin_identify_partial(2) — Perform an Admin identify command, and retrieve partial response data.
• nvme_mi_admin_identify_primary_ctrl(2) — Perform an Admin identify for primary controller capabilities data structure.
• nvme_mi_admin_identify_secondary_ctrl_list(2) — Perform an Admin identify for a secondary controller list.
• nvme_mi_admin_ns_attach(2) — Attach or detach namespace to controller(s)
• nvme_mi_admin_ns_attach_ctrls(2) — Attach namespace to controllers
• nvme_mi_admin_ns_detach_ctrls(2) — Detach namespace from controllers
• nvme_mi_admin_req_hdr(2) — Admin command request header.
• nvme_mi_admin_resp_hdr(2) — Admin command response header.
• nvme_mi_admin_sanitize_nvm(2) — Start a subsystem Sanitize operation
• nvme_mi_admin_security_recv(2) — Perform a Security Receive command on a controller.
• nvme_mi_admin_security_send(2) — Perform a Security Send command on a controller.
• nvme_mi_admin_set_features_power_mgmt(2) — Set power management feature
• nvme_mi_admin_xfer(2) — Raw admin transfer interface.
• nvme_mi_aem_aeei_get_aee(2) — return aee from aeei field
• nvme_mi_aem_aeei_get_aeeid(2) — return aeeid from aeei field
• nvme_mi_aem_aeei_set_aee(2) — set aee in the aeei field
• nvme_mi_aem_aeei_set_aeeid(2) — set aeeid in the aeei field
• nvme_mi_aem_aemti_get_aemgn(2) — return aemgn from aemti field
• nvme_mi_aem_aeolli_get_aeoltl(2) — return aeoltl from aeolli field
• nvme_mi_aem_aeolli_set_aeoltl(2) — set aeoltl in the aeolli field
• nvme_mi_aem_aesi_get_aese(2) — return aese from aesi field
• nvme_mi_aem_aesi_get_aesid(2) — return aesid from aesi field
• nvme_mi_aem_aesi_set_aee(2) — set aee in the aesi field
• nvme_mi_aem_aesi_set_aesid(2) — set aesid in the aesi field
• nvme_mi_aem_config(2) — Provided for nvme_mi_aem_enable
• nvme_mi_aem_disable(2) — Disable AE on the provided endpoint
• nvme_mi_aem_enable(2) — Enable AE on the provided endpoint
• nvme_mi_aem_enable_item(2) — AE Enabled item entry
• nvme_mi_aem_enable_list(2) — AE enable list sent with SET CONFIG Asyncronous Event
• nvme_mi_aem_enable_list_header(2) — AE Enable list header
• nvme_mi_aem_get_enabled(2) — Return information on which AEs are enabled
• nvme_mi_aem_get_fd(2) — Returns the pollable fd for AEM data available
• nvme_mi_aem_get_next_event(2) — Get details for the next event to parse
• nvme_mi_aem_handler_next_action(2) — Next action for the AEM state machine handler
• nvme_mi_aem_msg(2) — AEM Message definition.
• nvme_mi_aem_occ_data(2) — AEM Message definition.
• nvme_mi_aem_occ_list_hdr(2) — AE occurrence list header
• nvme_mi_aem_open(2) — Prepare an existing endpoint to receive AEMs
• nvme_mi_aem_process(2) — Process AEM on the provided endpoint
• nvme_mi_aem_supported_item(2) — AE Supported List Item
• nvme_mi_aem_supported_list(2) — AE Supported List received with GET CONFIG Asynchronous Event
• nvme_mi_aem_supported_list_header(2) — Asynchronous Event Supported List Header.
• nvme_mi_ccs(2) — Get State Control Primitive Success Response Fields - Control Primitive Specific Response
• nvme_mi_close(2) — Close an endpoint connection and release resources, including controller objects.
• nvme_mi_close_ctrl(2) — free a controller
• nvme_mi_cmd_supported_effects(2) — MI Command Supported and Effects Data Structure
• nvme_mi_cmd_supported_effects_log(2) — NVMe-MI Commands Supported and Effects Log
• nvme_mi_config_id(2) — NVMe-MI Configuration identifier.
• nvme_mi_config_smbus_freq(2) — SMBus/I2C frequency values
• nvme_mi_control(2) — Perform a Control Primitive command
• nvme_mi_control_opcode(2) — Operation code for Control Primitives.
• nvme_mi_control_req(2) — The Control Primitive request.
• nvme_mi_create_root(2) — Create top-level MI (root) handle.
• nvme_mi_csts(2) — Controller Health Data Structure (CHDS) - Controller Status (CSTS)
• nvme_mi_ctrl_health_status(2) — Controller Health Data Structure (CHDS)
• nvme_mi_ctrl_id(2) — get the ID of a controller
• nvme_mi_cwarn(2) — Controller Health Data Structure (CHDS) - Critical Warning (CWARN)
• nvme_mi_dtyp(2) — Data Structure Type field.
• nvme_mi_elem(2) — Element Descriptor Types
• nvme_mi_event(2) — AE event information structure
• nvme_mi_free_root(2) — Free root object.
• nvme_mi_init_ctrl(2) — initialise a NVMe controller.
• nvme_mi_message_type(2) — NVMe-MI message type field.
• nvme_mi_mi_opcode(2) — Operation code for supported NVMe-MI commands.
• nvme_mi_mi_read_mi_data_ctrl(2) — Perform a Read MI Data Structure command, retrieving controller information
• nvme_mi_mi_read_mi_data_ctrl_list(2) — Perform a Read MI Data Structure command, retrieving the list of attached controllers.
• nvme_mi_mi_read_mi_data_port(2) — Perform a Read MI Data Structure command, retrieving port data.
• nvme_mi_mi_read_mi_data_subsys(2) — Perform a Read MI Data Structure command, retrieving subsystem data.
• nvme_mi_mi_req_hdr(2) — MI request message header.
• nvme_mi_mi_resp_hdr(2) — MI response message header.
• nvme_mi_mi_subsystem_health_status_poll(2) — Read the Subsystem Health Data Structure from the NVM subsystem
• nvme_mi_mi_xfer(2) — Raw mi transfer interface.
• nvme_mi_msg_hdr(2) — General MI message header.
• nvme_mi_msg_resp(2) — Generic response type.
• nvme_mi_nvm_ss_health_status(2) — Subsystem Management Data Structure
• nvme_mi_open_mctp(2) — Create an endpoint using a MCTP connection.
• nvme_mi_osc(2) — Optionally Supported Command Data Structure
• nvme_mi_port_pcie(2) — PCIe Port Specific Data
• nvme_mi_port_smb(2) — SMBus Port Specific Data
• nvme_mi_read_ctrl_info(2) — Controller Information Data Structure
• nvme_mi_read_nvm_ss_info(2) — NVM Subsystem Information Data Structure
• nvme_mi_read_port_info(2) — Port Information Data Structure
• nvme_mi_read_sc_list(2) — Management Endpoint Buffer Supported Command List Data Structure
• nvme_mi_resp_status(2) — values for the response status field
• nvme_mi_set_probe_enabled(2) — enable/disable the probe for new endpoints
• nvme_mi_status_to_string(2) — return a string representation of the MI status.
• nvme_mi_vpd_hdr(2) — Vital Product Data Common Header
• nvme_mi_vpd_mr_common(2) — NVMe MultiRecord Area
• nvme_mi_vpd_mra(2) — NVMe MultiRecord Area
• nvme_mi_vpd_ppmra(2) — NVMe PCIe Port MultiRecord Area
• nvme_mi_vpd_telem(2) — Vital Product Data Element Descriptor
• nvme_mi_vpd_tra(2) — Vital Product Data Topology MultiRecord
• nvme_namespace_attach_ctrls(2) — Attach namespace to controller(s)
• nvme_namespace_detach_ctrls(2) — Detach namespace from controller(s)
• nvme_namespace_filter(2) — Filter for namespaces
• nvme_namespace_first_path(2) — Start path iterator
• nvme_namespace_for_each_path(2) — Traverse paths
• nvme_namespace_for_each_path_safe(2) — Traverse paths
• nvme_namespace_next_path(2) — Next path iterator
• nvme_nbft_free(2) — Free the struct nbft_info and its contents
• nvme_nbft_read(2) — Read and parse contents of an ACPI NBFT table
• nvme_nd_ns_fpi(2) — If a format operation is in progress, this field indicates the percentage of the namespace that remains to be formatted.
• nvme_next_host(2) — Next host iterator
• nvme_next_subsystem(2) — Next subsystem iterator
• nvme_ns_attach(2) — Attach or detach namespace to controller(s)
• nvme_ns_attach_args(2) — Arguments for Nvme Namespace Management command
• nvme_ns_attach_ctrls(2) — Attach namespace to controllers
• nvme_ns_attach_sel(2) — Namespace Attachment - Select
• nvme_ns_compare(2) — Compare data on a namespace
• nvme_ns_detach_ctrls(2) — Detach namespace from controllers
• nvme_ns_flush(2) — Flush data to a namespace
• nvme_ns_get_csi(2) — Command set identifier of a namespace
• nvme_ns_get_ctrl(2) — &nvme_ctrl_t of a namespace
• nvme_ns_get_eui64(2) — 64-bit eui of a namespace
• nvme_ns_get_fd(2) — Get associated file descriptor
• nvme_ns_get_firmware(2) — Firmware string of a namespace
• nvme_ns_get_generic_name(2) — Returns name of generic namespace chardev.
• nvme_ns_get_lba_count(2) — LBA count of a namespace
• nvme_ns_get_lba_size(2) — LBA size of a namespace
• nvme_ns_get_lba_util(2) — LBA utilization of a namespace
• nvme_ns_get_meta_size(2) — Metadata size of a namespace
• nvme_ns_get_model(2) — Model of a namespace
• nvme_ns_get_name(2) — sysfs name of a namespace
• nvme_ns_get_nguid(2) — 128-bit nguid of a namespace
• nvme_ns_get_nsid(2) — NSID of a namespace
• nvme_ns_get_serial(2) — Serial number of a namespace
• nvme_ns_get_subsystem(2) — &nvme_subsystem_t of a namespace
• nvme_ns_get_sysfs_dir(2) — sysfs directory of a namespace
• nvme_ns_get_uuid(2) — UUID of a namespace
• nvme_ns_head_get_sysfs_dir(2) — sysfs dir of namespave head
• nvme_ns_id_desc(2) — Namespace identifier type descriptor
• nvme_ns_id_desc_nidt(2) — Known namespace identifier types
• nvme_ns_identify(2) — Issue an 'identify namespace' command
• nvme_ns_identify_descs(2) — Issue an 'identify descriptors' command
• nvme_ns_list(2) — Namespace List
• nvme_ns_metadata_type(2) — Namespace Metadata Element Types
• nvme_ns_mgmt(2) — Issue a Namespace management command
• nvme_ns_mgmt_args(2) — Arguments for NVMe Namespace Management command
• nvme_ns_mgmt_create(2) — Create a non attached namespace
• nvme_ns_mgmt_delete(2) — Delete a non attached namespace
• nvme_ns_mgmt_delete_timeout(2) — Delete a non attached namespace with timeout
• nvme_ns_mgmt_host_sw_specified(2) — Namespace management Host Software Specified Fields.
• nvme_ns_mgmt_sel(2) — Namespace Management - Select
• nvme_ns_read(2) — Read from a namespace
• nvme_ns_release_fd(2) — Close fd and clear fd from ns object
• nvme_ns_rescan(2) — Initiate a controller rescan
• nvme_ns_verify(2) — Verify data on a namespace
• nvme_ns_write(2) — Write to a namespace
• nvme_ns_write_protect_cfg(2) — Write Protection - Write Protection State
• nvme_ns_write_uncorrectable(2) — Issus a 'write uncorrectable' command
• nvme_ns_write_zeros(2) — Write zeros to a namespace
• nvme_nss_hw_err_event(2) — NVM Subsystem Hardware Error Event
• nvme_nvm_id_ns(2) — NVME Command Set I/O Command Set Specific Identify Namespace Data Structure
• nvme_nvm_id_ns_elbaf(2) — This field indicates the extended LBA format
• nvme_nvm_id_ns_pif(2) — This field indicates the type of the Protection Information Format
• nvme_nvm_identify_ctrl(2) — Identify controller data
• nvme_nvmeset_pl_status(2) — Predictable Latency Per NVM Set Log - Status
• nvme_nvmset_attr(2) — NVM Set Attributes Entry
• nvme_nvmset_pl_events(2) — Predictable Latency Per NVM Set Log - Event Type
• nvme_nvmset_predictable_lat_log(2) — Predictable Latency Mode - Deterministic Threshold Configuration Data
• nvme_open(2) — Open an nvme controller or namespace device
• nvme_parse_uri(2) — Parse the URI string
• nvme_passthru_cmd(2) — nvme passthrough command structure
• nvme_passthru_cmd64(2) — 64-bit nvme passthrough command structure
• nvme_path_get_ana_state(2) — ANA state of an nvme_path_t object
• nvme_path_get_ctrl(2) — Parent controller of an nvme_path_t object
• nvme_path_get_name(2) — sysfs name of an &nvme_path_t object
• nvme_path_get_ns(2) — Parent namespace of an nvme_path_t object
• nvme_path_get_numa_nodes(2) — NUMA nodes of an nvme_path_t object
• nvme_path_get_queue_depth(2) — Queue depth of an nvme_path_t object
• nvme_path_get_sysfs_dir(2) — sysfs directory of an nvme_path_t object
• nvme_paths_filter(2) — Filter for paths
• nvme_pel_ehai(2) — This field indicates the persistent event header additional information
• nvme_pel_ehai_pit(2) — Persistent Event Header Additional Information - Port Identifier Type
• nvme_pel_rci(2) — This field indicates the persistent event log reporting context
• nvme_pel_rci_rcpit(2) — Persistent Event Log Reporting Context - Port Identifier Type
• nvme_perf_attr_id(2) — Performance attribute identifier structure
• nvme_perf_attr_id_list(2) — Performance attribute identifier list structure
• nvme_perf_characteristics(2) — Performance attribute structure
• nvme_persistent_event_entry(2) — Persistent Event
• nvme_persistent_event_log(2) — Persistent Event Log
• nvme_persistent_event_types(2) — Persistent event log events
• nvme_pevent_log_action(2) — Persistent Event Log - Action
• nvme_phy_rx_eom_log(2) — Physical Interface Receiver Eye Opening Measurement Log
• nvme_phy_rx_eom_progress(2) — EOM In Progress Values
• nvme_plm_config(2) — Predictable Latency Mode - Deterministic Threshold Configuration Data Structure
• nvme_pmr_size(2) — Calculate size of persistent memory region elasticity buffer
• nvme_pmr_throughput(2) — Calculate throughput of persistent memory buffer
• nvme_pmrcap(2) — This field indicates the persistent memory region capabilities
• nvme_pmrctl(2) — This field indicates the persistent memory region control
• nvme_pmrebs(2) — This field indicates the persistent memory region elasticity buffer size
• nvme_pmrmsc(2) — This field indicates the persistent memory region memory space control
• nvme_pmrsts(2) — This field indicates the persistent memory region status
• nvme_pmrswtp(2) — This field indicates the persistent memory region sustained write throughput
• nvme_power_on_reset_info_list(2) — Controller Reset Information
• nvme_primary_ctrl_cap(2) — Identify - Controller Capabilities Structure
• nvme_psd_flags(2) — Possible flag values in nvme power state descriptor
• nvme_psd_power_scale(2) — power scale occupies the upper 3 bits
• nvme_psd_ps(2) — Known values for &struct nvme_psd %ips and %aps. Use with nvme_psd_power_scale() to extract the power scale field to match this enum.
• nvme_psd_workload(2) — Specifies a workload hint in the Power Management Feature (see &struct nvme_psd.apw) to inform the NVM subsystem or indicate the conditions for the active power level.
• nvme_pull_model_ddc_req_log(2) — Pull Model DDC Request Log
• nvme_reachability_association_desc(2) — Reachability Association Descriptor
• nvme_reachability_associations_log(2) — Reachability Associations Log
• nvme_reachability_group_desc(2) — Reachability Group Descriptor
• nvme_reachability_groups_log(2) — Reachability Groups Log
• nvme_read(2) — Submit an nvme user read command
• nvme_read_config(2) — Read NVMe JSON configuration file
• nvme_read_key(2) — Read key raw data
• nvme_refresh_topology(2) — Refresh nvme_root_t object contents
• nvme_register_offsets(2) — controller registers for all transports. This is the layout of BAR0/1 for PCIe, and properties for fabrics.
• nvme_registered_ctrl(2) — Registered Controller Data Structure
• nvme_registered_ctrl_ext(2) — Registered Controller Extended Data Structure
• nvme_rescan_ctrl(2) — Rescan an existing controller
• nvme_resv_acquire(2) — Send an nvme reservation acquire
• nvme_resv_acquire_args(2) — Arguments for the NVMe Reservation Acquire Command
• nvme_resv_cptpl(2) — Reservation Register - Change Persist Through Power Loss State
• nvme_resv_notification_log(2) — Reservation Notification Log
• nvme_resv_notify_rnlpt(2) — Reservation Notification Log - Reservation Notification Log Page Type
• nvme_resv_racqa(2) — Reservation Acquire - Reservation Acquire Action
• nvme_resv_register(2) — Send an nvme reservation register
• nvme_resv_register_args(2) — Arguments for the NVMe Reservation Register command
• nvme_resv_release(2) — Send an nvme reservation release
• nvme_resv_release_args(2) — Arguments for the NVMe Reservation Release Command
• nvme_resv_report(2) — Send an nvme reservation report
• nvme_resv_report_args(2) — Arguments for the NVMe Reservation Report command
• nvme_resv_rrega(2) — Reservation Register - Reservation Register Action
• nvme_resv_rrela(2) — Reservation Release - Reservation Release Action
• nvme_resv_rtype(2) — Reservation Type Encoding
• nvme_resv_status(2) — Reservation Status Data Structure
• nvme_revoke_tls_key(2) — Revoke TLS key from keyring
• nvme_rotational_media_info_log(2) — Rotational Media Information Log
• nvme_sanitize_compln_event(2) — Sanitize Completion Event Data
• nvme_sanitize_log_page(2) — Sanitize Status (Log Identifier 81h)
• nvme_sanitize_nvm(2) — Start a sanitize operation
• nvme_sanitize_nvm_args(2) — Arguments for the NVMe Sanitize NVM command
• nvme_sanitize_sanact(2) — Sanitize Action
• nvme_sanitize_ssi(2) — Sanitize State Information (SSI)
• nvme_sanitize_sstat(2) — Sanitize Status (SSTAT)
• nvme_sanitize_start_event(2) — Sanitize Start Event Data
• nvme_scan(2) — Scan NVMe topology
• nvme_scan_ctrl(2) — Scan on a controller
• nvme_scan_ctrl_namespace_paths(2) — Scan for namespace paths in a controller
• nvme_scan_ctrl_namespaces(2) — Scan for namespaces in a controller
• nvme_scan_ctrls(2) — Scan for controllers
• nvme_scan_namespace(2) — scan namespace based on sysfs name
• nvme_scan_ns_head_paths(2) — Scan for namespace paths
• nvme_scan_subsystem_namespaces(2) — Scan for namespaces in a subsystem
• nvme_scan_subsystems(2) — Scan for subsystems
• nvme_scan_tls_keys(2) — Iterate over TLS keys in a keyring
• nvme_scan_topology(2) — Scan NVMe topology and apply filter
• nvme_secondary_ctrl(2) — Secondary Controller Entry
• nvme_secondary_ctrl_list(2) — Secondary Controller List
• nvme_security_receive(2) — Security Receive command
• nvme_security_receive_args(2) — Arguments for the NVMe Security Receive command
• nvme_security_send(2) — Security Send command
• nvme_security_send_args(2) — Arguments for the NVMe Security Send command
• nvme_self_test_log(2) — Device Self-test (Log Identifier 06h)
• nvme_set_etdas(2) — Set the Extended Telemetry Data Area 4 Supported bit
• nvme_set_feat_event_layout(2) — This field indicates the set feature event layout
• nvme_set_feature_event(2) — Set Feature Event Data
• nvme_set_features(2) — Set a feature attribute
• nvme_set_features_arbitration(2) — Set arbitration features
• nvme_set_features_args(2) — Arguments for the NVMe Admin Set Feature command
• nvme_set_features_async_event(2) — Set asynchronous event feature
• nvme_set_features_auto_pst(2) — Set autonomous power state feature
• nvme_set_features_data(2) — Helper function for @nvme_set_features()
• nvme_set_features_endurance_evt_cfg(2) — Set endurance event config feature
• nvme_set_features_err_recovery(2) — Set error recovery feature
• nvme_set_features_hctm(2) — Set thermal management feature
• nvme_set_features_host_behavior(2) — Set host behavior feature
• nvme_set_features_host_id(2) — Set enable extended host identifiers feature
• nvme_set_features_iocs_profile(2) — Set I/O command set profile feature
• nvme_set_features_irq_coalesce(2) — Set IRQ coalesce feature
• nvme_set_features_irq_config(2) — Set IRQ config feature
• nvme_set_features_lba_range(2) — Set LBA range feature
• nvme_set_features_lba_sts_interval(2) — Set LBA status information feature
• nvme_set_features_nopsc(2) — Set non-operational power state feature
• nvme_set_features_plm_config(2) — Set predictable latency feature
• nvme_set_features_plm_window(2) — Set window select feature
• nvme_set_features_power_mgmt(2) — Set power management feature
• nvme_set_features_resv_mask(2) — Set reservation notification mask feature
• nvme_set_features_resv_mask2(2) — Set reservation notification mask feature
• nvme_set_features_resv_persist(2) — Set persist through power loss feature
• nvme_set_features_resv_persist2(2) — Set persist through power loss feature
• nvme_set_features_rrl(2) — Set read recovery level feature
• nvme_set_features_sanitize(2) — Set sanitize feature
• nvme_set_features_simple(2) — Helper function for @nvme_set_features()
• nvme_set_features_sw_progress(2) — Set pre-boot software load count feature
• nvme_set_features_temp_thresh(2) — Set temperature threshold feature
• nvme_set_features_temp_thresh2(2) — Set temperature threshold feature
• nvme_set_features_timestamp(2) — Set timestamp feature
• nvme_set_features_volatile_wc(2) — Set volatile write cache feature
• nvme_set_features_write_atomic(2) — Set write atomic feature
• nvme_set_features_write_protect(2) — Set write protect feature
• nvme_set_features_write_protect2(2) — Set write protect feature
• nvme_set_keyring(2) — Link keyring for lookup
• nvme_set_property(2) — Set controller property
• nvme_set_property_args(2) — Arguments for NVMe Set Property command
• nvme_set_root(2) — Set nvme_root_t context
• nvme_smart_crit(2) — Critical Warning
• nvme_smart_egcw(2) — Endurance Group Critical Warning Summary
• nvme_smart_log(2) — SMART / Health Information Log (Log Identifier 02h)
• nvme_st_code(2) — Self-test Code value
• nvme_st_curr_op(2) — Current Device Self-Test Operation
• nvme_st_result(2) — Self-test Result
• nvme_st_valid_diag_info(2) — Valid Diagnostic Information
• nvme_status_code(2) — Returns the NVMe Status Code
• nvme_status_code_type(2) — Returns the NVMe Status Code Type
• nvme_status_equals(2) — helper to check a status against a type and value
• nvme_status_field(2) — Defines all parts of the nvme status field: status code, status code type, and additional flags.
• nvme_status_get_type(2) — extract the type from a nvme_* return value
• nvme_status_get_value(2) — extract the status value from a nvme_* return value
• nvme_status_result(2) — Result of the device self-test operation
• nvme_status_to_errno(2) — Converts nvme return status to errno
• nvme_status_to_string(2) — Returns string describing nvme return status.
• nvme_status_type(2) — type encoding for NVMe return values, when represented as an int.
• nvme_std_perf_attr(2) — Standard performance attribute structure
• nvme_streams_directive_params(2) — Streams Directive - Return Parameters Data Structure
• nvme_streams_directive_status(2) — Streams Directive - Get Status Data Structure
• nvme_submit_admin_passthru(2) — Submit an nvme passthrough admin command
• nvme_submit_admin_passthru64(2) — Submit a 64-bit nvme passthrough admin command
• nvme_submit_io_passthru(2) — Submit an nvme passthrough command
• nvme_submit_io_passthru64(2) — Submit a 64-bit nvme passthrough command
• nvme_subsys_filter(2) — Filter for subsystems
• nvme_subsys_type(2) — Type of the NVM subsystem.
• nvme_subsystem_first_ctrl(2) — First ctrl iterator
• nvme_subsystem_first_ns(2) — Start namespace iterator
• nvme_subsystem_for_each_ctrl(2) — Traverse controllers
• nvme_subsystem_for_each_ctrl_safe(2) — Traverse controllers
• nvme_subsystem_for_each_ns(2) — Traverse namespaces
• nvme_subsystem_for_each_ns_safe(2) — Traverse namespaces
• nvme_subsystem_get_application(2) — Return the application string
• nvme_subsystem_get_fw_rev(2) — Return the firmware rev of subsystem
• nvme_subsystem_get_host(2) — Returns nvme_host_t object
• nvme_subsystem_get_iopolicy(2) — Return the IO policy of subsytem
• nvme_subsystem_get_model(2) — Return the model of subsystem
• nvme_subsystem_get_name(2) — sysfs name of an nvme_subsystem_t object
• nvme_subsystem_get_nqn(2) — Retrieve NQN from subsystem
• nvme_subsystem_get_serial(2) — Return the serial number of subsystem
• nvme_subsystem_get_sysfs_dir(2) — sysfs directory of an nvme_subsystem_t object
• nvme_subsystem_get_type(2) — Returns the type of a subsystem
• nvme_subsystem_lookup_namespace(2) — lookup namespace by NSID
• nvme_subsystem_next_ctrl(2) — Next ctrl iterator
• nvme_subsystem_next_ns(2) — Next namespace iterator
• nvme_subsystem_release_fds(2) — Close all opened fds under subsystem
• nvme_subsystem_reset(2) — Initiate a subsystem reset
• nvme_subsystem_set_application(2) — Set the application string
• nvme_supported_cap_config_list_log(2) — Supported Capacity Configuration list log page
• nvme_supported_log_pages(2) — Supported Log Pages - Log
• nvme_telemetry_da(2) — Telemetry Log Data Area
• nvme_telemetry_log(2) — Retrieve internal data specific to the manufacturer.
• nvme_thermal_exc_event(2) — Thermal Excursion Event Data
• nvme_time_stamp_change_event(2) — Timestamp Change Event
• nvme_timestamp(2) — Timestamp - Data Structure for Get Features
• nvme_unit(2) — Defined buffer size and write throughput granularity units
• nvme_unlink_ctrl(2) — Unlink controller
• nvme_update_config(2) — Update JSON configuration
• nvme_update_key(2) — Update key raw data
• nvme_uring_cmd(2) — nvme uring command structure
• nvme_verify(2) — Send an nvme verify command
• nvme_version(2) — Selector for version to be returned by @nvme_get_version
• nvme_virt_mgmt_act(2) — Virtualization Management - Action
• nvme_virt_mgmt_rt(2) — Virtualization Management - Resource Type
• nvme_virtual_mgmt(2) — Virtualization resource management
• nvme_virtual_mgmt_args(2) — Arguments for the NVMe Virtualization resource management command
• nvme_vs(2) — This field indicates the version
• nvme_vs_perf_attr(2) — Vendor specific performance attribute structure
• nvme_write(2) — Submit an nvme user write command
• nvme_write_uncorrectable(2) — Submit an nvme write uncorrectable command
• nvme_write_zeros(2) — Submit an nvme write zeroes command
• nvme_zns_append(2) — Append data to a zone
• nvme_zns_append_args(2) — Arguments for the NVMe ZNS Append command
• nvme_zns_changed_zone_log(2) — ZNS Changed Zone List log
• nvme_zns_desc(2) — Zone Descriptor Data Structure
• nvme_zns_id_ctrl(2) — I/O Command Set Specific Identify Controller Data Structure for the Zoned Namespace Command Set
• nvme_zns_id_ns(2) — Zoned Namespace Command Set Specific Identify Namespace Data Structure
• nvme_zns_identify_ctrl(2) — ZNS identify controller data
• nvme_zns_identify_ns(2) — ZNS identify namespace data
• nvme_zns_lbafe(2) — LBA Format Extension Data Structure
• nvme_zns_mgmt_recv(2) — ZNS management receive command
• nvme_zns_mgmt_recv_args(2) — Arguments for the NVMe ZNS Management Receive command
• nvme_zns_mgmt_send(2) — ZNS management send command
• nvme_zns_mgmt_send_args(2) — Arguments for the NVMe ZNS Management Send command
• nvme_zns_recv_action(2) — Zone Management Receive - Zone Receive Action Specific Features
• nvme_zns_report_options(2) — Zone Management Receive - Zone Receive Action Specific Field
• nvme_zns_report_zones(2) — Return the list of zones
• nvme_zns_send_action(2) — Zone Management Send - Zone Send Action
• nvme_zns_za(2) — Zone Descriptor Data Structure
• nvme_zns_zs(2) — Zone Descriptor Data Structure - Zone State
• nvme_zns_zt(2) — Zone Descriptor Data Structure - Zone Type
• nvme_zone_report(2) — Report Zones Data Structure
• nvmf_add_ctrl(2) — Connect a controller and update topology
• nvmf_addr_family(2) — Address Family codes for Discovery Log Page entry ADRFAM field
• nvmf_adrfam_str(2) — Decode ADRFAM field
• nvmf_cms_str(2) — Decode RDMA connection management service field
• nvmf_connect_ctrl(2) — Connect a controller
• nvmf_connect_data(2) — Data payload for the 'connect' command
• nvmf_connect_disc_entry(2) — Connect controller based on the discovery log page entry
• nvmf_default_config(2) — Default values for fabrics configuration
• nvmf_dim_data(2) — Discovery Information Management (DIM) - Data
• nvmf_dim_entfmt(2) — Discovery Information Management Entry Format
• nvmf_dim_etype(2) — Discovery Information Management Entity Type
• nvmf_dim_tas(2) — Discovery Information Management Task
• nvmf_disc_eflags(2) — Discovery Log Page entry flags.
• nvmf_disc_log_entry(2) — Discovery Log Page entry
• nvmf_discovery_log(2) — Discovery Log Page (Log Identifier 70h)
• nvmf_eflags_str(2) — Decode EFLAGS field
• nvmf_exat_len(2) — Return length rounded up by 4
• nvmf_exattype(2) — Extended Attribute Type
• nvmf_ext_attr(2) — Extended Attribute (EXAT)
• nvmf_ext_die(2) — Extended Discovery Information Entry (DIE)
• nvmf_get_discovery_log(2) — Return the discovery log page
• nvmf_get_discovery_wargs(2) — Get the discovery log page with args
• nvmf_hostid_from_file(2) — Reads the host identifier from the config default location
• nvmf_hostid_generate(2) — Generate a machine specific host identifier
• nvmf_hostnqn_from_file(2) — Reads the host nvm qualified name from the config default location
• nvmf_hostnqn_generate(2) — Generate a machine specific host nqn
• nvmf_hostnqn_generate_from_hostid(2) — Generate a host nqn from host identifier
• nvmf_log_discovery_lid_support(2) — Discovery log specific support
• nvmf_log_discovery_lsp(2) — Discovery log specific field
• nvmf_prtype_str(2) — Decode RDMA Provider type field
• nvmf_qptype_str(2) — Decode RDMA QP Service type field
• nvmf_rdma_cms(2) — RDMA Connection Management Service Type codes for Discovery Log Page entry TSAS RDMA_CMS field
• nvmf_rdma_prtype(2) — RDMA Provider Type codes for Discovery Log Page entry TSAS RDMA_PRTYPE field
• nvmf_rdma_qptype(2) — RDMA QP Service Type codes for Discovery Log Page entry TSAS RDMA_QPTYPE field
• nvmf_register_ctrl(2) — Perform registration task with a DC
• nvmf_sectype_str(2) — Decode SECTYPE field
• nvmf_subtype_str(2) — Decode SUBTYPE field
• nvmf_tcp_sectype(2) — Transport Specific Address Subtype Definition for NVMe/TCP Transport
• nvmf_treq(2) — Transport Requirements codes for Discovery Log Page entry TREQ field
• nvmf_treq_str(2) — Decode TREQ field
• nvmf_trtype(2) — Transport Type codes for Discovery Log Page entry TRTYPE field
• nvmf_trtype_str(2) — Decode TRTYPE field
• nvmf_update_config(2) — Update fabrics configuration values