Package nvme

• nvme(1) — the NVMe storage command line interface utility (nvme\-cli)
• nvme-admin-passthru(1) — Submit an arbitrary admin command, return results
• nvme-ana-log(1) — Send NVMe ANA log page request, returns result and log
• nvme-attach-ns(1) — Send NVMe attach namespace, return result.
• nvme-boot-part-log(1) — Retrieves a Boot Partition log page from an NVMe device
• nvme-capacity-mgmt(1) — Send capacity management command to configure/create/delete Endurance Groups or NVM Sets, returns results.
• nvme-changed-ns-list-log(1) — Send NVMe Changed Namespace List log page request, returns result and log.
• nvme-cmdset-ind-id-ns(1) — Send NVMe I/O Command Set Independent Identify Namespace, return result and structure.
• nvme-compare(1) — Send an NVMe Compare command, provide results
• nvme-connect(1) — Connect to a Fabrics controller.
• nvme-connect-all(1) — Discover and Connect to Fabrics controllers.
• nvme-copy(1) — Send an NVMe Simple Copy command, provide results
• nvme-create-ns(1) — Send NVMe Namespace management command to create namespace, returns results.
• nvme-dapustor-smart-log-add(1) — Send NVMe DapuStor Additional SMART log page request, returns result and log
• nvme-delete-ns(1) — Send NVMe Namespace Management delete namespace command, return result.
• nvme-dera-stat(1) — Send NVMe Dera Device status and Additional SMART log page request, returns result and log
• nvme-detach-ns(1) — Send NVMe detach namespace, return result.
• nvme-device-self-test(1) — Perform the necessary tests to observe the performance and the parameters
• nvme-dim(1) — Send Discovery Information Management command to one or more Discovery Controllers.
• nvme-dir-receive(1) — Send a directive receive command, returns applicable results
• nvme-dir-send(1) — Issue a directive send command, returns applicable results
• nvme-disconnect(1) — Disconnect one or more Fabrics controller(s).
• nvme-disconnect-all(1) — Disconnect from all connected Fabrics controllers.
• nvme-discover(1) — Send Get Log Page request to Discovery Controller.
• nvme-dsm(1) — Send NVMe Data Set Management, return results
• nvme-effects-log(1) — Send NVMe Command Effects log page request, returns result and log
• nvme-endurance-event-agg-log(1) — Send NVMe Endurance log page request, returns result and log
• nvme-endurance-log(1) — Send NVMe Endurance log page request, returns result and log
• nvme-error-log(1) — Send NVME Error log page request, return result and log
• nvme-fdp-configs(1) — Get Flexible Data Placement Configurations
• nvme-fdp-events(1) — Get Flexible Data Placement Events
• nvme-fdp-feature(1) — Show or change Flexible Data Placement (FDP) Feature
• nvme-fdp-set-events(1) — Enable or disable FDP events
• nvme-fdp-stats(1) — Get Flexible Data Placement Statistics
• nvme-fdp-status(1) — Get Reclaim Unit Handle Status
• nvme-fdp-update(1) — Reclaim Unit Handle Update
• nvme-fdp-usage(1) — Get Reclaim Unit Handle Usage
• nvme-fid-support-effects-log(1) — Send NVMe FID Support and Effects log, return result and structure
• nvme-flush(1) — Flush command.
• nvme-format(1) — Format an NVMe device
• nvme-fw-commit(1) — Used to verify and commit a firmware image.
• nvme-fw-download(1) — Download all or a portion of an nvme firmware image.
• nvme-fw-log(1) — Send NVMe Firmware log page request, returns result and log
• nvme-gen-hostnqn(1) — Generate a host NVMe Qualified Name
• nvme-get-feature(1) — Gets an NVMe feature, returns applicable results
• nvme-get-lba-status(1) — Get LBA Status from NVMe device
• nvme-get-log(1) — Retrieves a log page from an NVMe device
• nvme-get-ns-id(1) — Retrieves the namespace ID for an NVMe block device
• nvme-get-property(1) — Reads and shows the defined NVMe controller property for NVMe over Fabric
• nvme-help(1) — Help information.
• nvme-huawei-id-ctrl(1) — Send NVMe Identify Controller, return result and structure
• nvme-huawei-list(1) — List all recognized Huawei NVMe devices
• nvme-id-ctrl(1) — Send NVMe Identify Controller, return result and structure
• nvme-id-domain(1) — Send NVMe Identify Domain List, return result and structure
• nvme-id-iocs(1) — Send NVMe Identify I/O Command Set, return result and structure
• nvme-id-ns(1) — Send NVMe Identify Namespace, return result and structure
• nvme-id-nvmset(1) — Send NVMe Identify NVM Set List, return result and structure
• nvme-inspur-nvme-vendor-log(1) — Send NVMe Inspur Device Vendor log page request, returns result
• nvme-intel-id-ctrl(1) — Send NVMe Identify Controller, return result and structure
• nvme-intel-internal-log(1) — Retrieve Intel device\*(Aqs internal log and save to file.
• nvme-intel-lat-stats(1) — Send NVMe Identify Controller, return result and structure
• nvme-intel-market-name(1) — Send NVMe Identify Controller, return result and structure
• nvme-intel-smart-log-add(1) — Send NVMe Intel Additional SMART log page request, returns result and log
• nvme-intel-temp-stats(1) — Send NVMe SMART log page request, returns result and log
• nvme-io-mgmt-recv(1) — I/O Management Receive command
• nvme-io-mgmt-send(1) — I/O Management Send command
• nvme-io-passthru(1) — Submit an arbitrary io command, return results
• nvme-lba-status-log(1) — Send LBA Status Log Page request returns result and log
• nvme-list(1) — List all recognized NVMe devices
• nvme-list-ctrl(1) — Send NVMe Identify List Controllers, return result and structure
• nvme-list-endgrp(1) — Send NVMe Identify Endurance Group List, return result and structure
• nvme-list-ns(1) — Send NVMe Identify List Namespaces, return result and structure
• nvme-list-subsys(1) — List all NVMe subsystems
• nvme-lockdown(1) — Send an NVMe Lockdown command to prohibit or allow the execution of command
• nvme-mangoboost-id-ctrl(1) — Send NVMe Identify Controller, return result and structure
• nvme-mi-cmd-support-effects-log(1) — Send NVMe MI Command Support and Effects log, returns results and structure
• nvme-micron-clear-pcie-errors(1) — Clears correctable PCIe correctable errors of given Micron device
• nvme-micron-internal-log(1) — Retrieve Micron device\*(Aqs internal logs and save to given zip file.
• nvme-micron-nand-stats(1) — Retrieves NAND statistics of given micron device
• nvme-micron-pcie-stats(1) — Retrieves pcie error statistics for given micron device
• nvme-micron-selective-download(1) — Performs selective firmware download that allows user select which firmware binary to update for 9200 devices. This requires power cycle the update completes.
• nvme-micron-smart-add-log(1) — Retrieves NAND statistics (2200 model drives) or Extended SMART information (OCP complaint models) of given micron device
• nvme-micron-temperature-stats(1) — Retrieves temperature information of given micron device
• nvme-netapp-ontapdevices(1) — Display information about ONTAP devices
• nvme-netapp-smdevices(1) — Display information for each NVMe path to an E\-Series volume
• nvme-ns-descs(1) — Send NVMe Identify for a list of Namespace Identification Descriptor structure, return result and structure
• nvme-ns-rescan(1) — Rescans the nvme namespaces.
• nvme-nvm-id-ctrl(1) — Send NVMe Identify Controller, return NVM command set structure
• nvme-nvme-mi-recv(1) — Send a NVMe\-MI Receive command to the specified device
• nvme-nvme-mi-send(1) — Send a NVMe\-MI Send command to the specified device
• nvme-ocp-clear-fw-activate-history(1) — Clear the OCP Firmware Update History Log
• nvme-ocp-clear-pcie-correctable-error-counters(1) — Clear PCIe correctable error counters
• nvme-ocp-device-capability-log(1) — Retrieves OCP Device Capability Log Page
• nvme-ocp-eol-plp-failure-mode(1) — Define and print EOL or PLP circuitry failure mode
• nvme-ocp-error-recovery-log(1) — Retrieves OCP Error Recovery Log Page
• nvme-ocp-get-dssd-async-event-config(1) — Get dssd\-async\-event\-config value
• nvme-ocp-get-dssd-power-state-feature(1) — Get DSSD Power State
• nvme-ocp-get-plp-health-check-interval(1) — Define and print plp\-health\-check\-interval value
• nvme-ocp-internal-log(1) — Conditionally retrieves 07h Telemetry Host\-Initiated log, C9h OCP Strings Log from an NVMe device or from user\-specified file path. Takes retrieved logs and decodes into human\-readable output format specified by user.
• nvme-ocp-latency-monitor-log(1) — Display latency monitor log page data in human readable format
• nvme-ocp-set-dssd-async-event-config(1) — Set DSSD asynchronous event configuration
• nvme-ocp-set-dssd-power-state-feature(1) — Set DSSD Power State
• nvme-ocp-set-plp-health-check-interval(1) — Define and set PLP health check interval
• nvme-ocp-set-telemetry-profile(1) — Set Telemetry Profile
• nvme-ocp-smart-add-log(1) — Retrieves Extended SMART information of given OCP compliant device
• nvme-ocp-telemetry-string-log(1) — Retrieve OCP Telemetry String Log page
• nvme-ocp-unsupported-reqs-log(1) — Retrieves unsupported requirements log page of given OCP compliant device
• nvme-persistent-event-log(1) — Send NVMe persistent event log page request, returns result and log
• nvme-pred-lat-event-agg-log(1) — Send Predictable Latency Event Aggregate Log Page request, returns result and log
• nvme-predictable-lat-log(1) — Send Predictable latency per NVM set log page request, returns result and log
• nvme-primary-ctrl-caps(1) — Send identify Primary Controller Caps, return result and structure
• nvme-read(1) — Send an NVMe Read command, provide results
• nvme-reset(1) — Reset the nvme controller.
• nvme-resv-acquire(1) — Acquire an nvme reservation
• nvme-resv-notif-log(1) — Send NVMe Reservation Notification log page request, return result and log
• nvme-resv-register(1) — Register an nvme reservation
• nvme-resv-release(1) — Release an nvme reservation
• nvme-resv-report(1) — Send NVMe Reservation Report, parse the result
• nvme-rpmb(1) — Send RPMB commands to an NVMe device
• nvme-sanitize(1) — Send NVMe Sanitize Command, return result
• nvme-sanitize-log(1) — Send NVMe sanitize\-log Command, return result
• nvme-seagate-clear-fw-activate-history(1) — Clear the firmware activation history for a given Seagate device.
• nvme-seagate-clear-pcie-correctable-errors(1) — Clear Seagate PCIe error statistics
• nvme-seagate-cloud-SSD-plugin-version(1) — Shows OCP Seagate plugin\*(Aqs version information
• nvme-seagate-get-ctrl-tele(1) — Retrieve Seagate Controller\-Initiated Telemetry in either hex\-dump (default) or binary format
• nvme-seagate-get-host-tele(1) — Retrieve Seagate Host\-Initiated Telemetry in either hex\-dump (default) or binary format
• nvme-seagate-help(1) — Shows the Seagate plugin\*(Aqs help information
• nvme-seagate-plugin-version(1) — Shows Seagate plugin\*(Aqs version information
• nvme-seagate-version(1) — Shows the Seagate version information for nvme\-cli
• nvme-seagate-vs-fw-activate-history(1) — Retrieve Seagate vendor specific Controller\-Initiated Telemetry in binary
• nvme-seagate-vs-internal-log(1) — Retrieve Seagate vendor specific Controller\-Initiated Telemetry in binary
• nvme-seagate-vs-log-page-sup(1) — Retrieve Seagate vendor specific Supported Log\-pages Information
• nvme-seagate-vs-pcie-stats(1) — Retrieve Seagate vendor specific PCIe error statistics
• nvme-seagate-vs-smart-add-log(1) — Retrieve Seagate vendor specific extended\-SMART Information
• nvme-seagate-vs-temperature-stats(1) — Retrieve Seagate vendor specific temperature statistics
• nvme-security-recv(1) — Security Recv command
• nvme-security-send(1) — Security Send command
• nvme-sed-discover(1) — Discover SED Opal Locking Features
• nvme-sed-initialize(1) — Initialize a SED Opal Device for locking
• nvme-sed-lock(1) — Lock a SED Opal Device
• nvme-sed-password(1) — Change the locking password of a SED device
• nvme-sed-revert(1) — Revert a SED Opal Device from locking
• nvme-sed-unlock(1) — Unlock a SED Opal Device
• nvme-self-test-log(1) — Retrieve the log information initiated by device\-self\-test and display it
• nvme-set-feature(1) — Sets an NVMe feature, returns applicable results
• nvme-set-property(1) — Writes and shows the defined NVMe controller property for NVMe over Fabric
• nvme-show-hostnqn(1) — Show the host NQN configured for the system
• nvme-show-regs(1) — Reads and shows the defined NVMe controller registers for NVMe over PCIe or the controller properties for NVMe over Fabrics.
• nvme-show-topology(1) — Show topology of all NVMe subsystems
• nvme-smart-log(1) — Send NVMe SMART log page request, returns result and log
• nvme-sndk-capabilities(1) — Display sndk device command capabilities
• nvme-sndk-clear-assert-dump(1) — Clears the assert dump (if present).
• nvme-sndk-clear-fw-activate-history(1) — Clears the firmware activate history table.
• nvme-sndk-clear-pcie-correctable-errors(1) — Clears the pcie correctable errors field returned in the smart\-log\-add command.
• nvme-sndk-cloud-SSD-plugin-version(1) — Display sndk plugin Cloud SSD Plugin Version
• nvme-sndk-cloud-boot-SSD-version(1) — Display sndk plugin Cloud Boot SSD Version
• nvme-sndk-cu-smart-log(1) — Send NVMe Sandisk cu\-smart\-log Vendor Unique Command, return result
• nvme-sndk-drive-resize(1) — Send NVMe sndk Resize Vendor Unique Command, return result.
• nvme-sndk-get-dev-capabilities-log(1) — Send NVMe sndk get\-dev\-capabilities\-log plugin command, return parsed log output
• nvme-sndk-get-drive-status(1) — Send the NVMe sndk get\-drive\-status command, return result
• nvme-sndk-get-error-recovery-log(1) — Send NVMe sndk get\-error\-recovery\-log plugin command, return parsed log output.
• nvme-sndk-get-latency-monitor-log(1) — Display latency monitor log page data in human readable format
• nvme-sndk-get-unsupported-reqs-log(1) — Send NVMe sndk get\-unsupported\-reqs\-log plugin command, return parsed log output
• nvme-sndk-log-page-directory(1) — Retrieves the list of Log IDs supported by the drive
• nvme-sndk-namespace-resize(1) — Resizes the device\*(Aqs namespace.
• nvme-sndk-set-latency-monitor-feature(1) — Set NVMe sndk latency monitor feature options
• nvme-sndk-vs-cloud-log(1) — Send NVMe sndk vs\-cloud\-log Vendor Unique Command, return result
• nvme-sndk-vs-device-waf(1) — Calculates the device write amplification factor and prints both TLC and SLC results
• nvme-sndk-vs-drive-info(1) — Send the NVMe sndk vs\-drive\-info command, return result
• nvme-sndk-vs-error-reason-identifier(1) — Retrieve sndk device\*(Aqs telemetry log error reason identifier field
• nvme-sndk-vs-fw-activate-history(1) — Execute NVMe sndk vs\-fw\-activate\-history Vendor Unique Command, return result
• nvme-sndk-vs-hw-rev-log(1) — Send NVMe sndk vs\-hw\-rev\-log Vendor Unique Command, return result
• nvme-sndk-vs-internal-log(1) — Retrieve sndk device\*(Aqs internal firmware log and save to file.
• nvme-sndk-vs-nand-stats(1) — Send NVMe sndk vs\-nand\-stats Vendor Unique Command, return result
• nvme-sndk-vs-pcie-stats(1) — Send the NVMe sndk vs\-pcie\-stats command, return result
• nvme-sndk-vs-smart-add-log(1) — Send NVMe sndk vs\-smart\-add\-log Vendor Unique Command, return result
• nvme-sndk-vs-telemetry-controller-option(1) — Disable/Enable the controller initiated option of the telemetry log page.
• nvme-sndk-vs-temperature-stats(1) — Display temperature\-related statistics
• nvme-solidigm-clear-fw-activate-history(1) — Clear firmware update history log
• nvme-solidigm-clear-pcie-correctable-errors(1) — Clear PCIe Correctable Error Counters
• nvme-solidigm-cloud-SSDplugin-version(1) — Prints plug\-in OCP version
• nvme-solidigm-garbage-collect-log(1) — Retrieve Garbage Collection Log
• nvme-solidigm-id-ctrl(1) — Send NVMe Identify Controller, return result and structure
• nvme-solidigm-latency-tracking-log(1) — Enable/Retrieve Latency tracking Log
• nvme-solidigm-log-page-directory(1) — Retrieve log page directory
• nvme-solidigm-market-log(1) — Retrieve Market Log
• nvme-solidigm-parse-telemetry-log(1) — Parse and display Solidigm Telemetry log
• nvme-solidigm-smart-log-add(1) — Retrieve Solidigm SMART Log
• nvme-solidigm-temp-stats(1) — Retrieve Temperature Statistics log
• nvme-solidigm-vs-drive-info(1) — Retrieve drive information
• nvme-solidigm-vs-fw-activate-history(1) — Get firmware activation history log
• nvme-solidigm-vs-internal-log(1) — Retrieve Debug log binaries
• nvme-solidigm-vs-smart-add-log(1) — Get SMART / health extended log
• nvme-solidigm-workload-tracker(1) — Real\-time capture of Workload Tracker samples
• nvme-subsystem-reset(1) — Reset the nvme subsystem.
• nvme-supported-log-pages(1) — Send NVMe Supported Log pages request, returns result and log
• nvme-telemetry-log(1) — Retrieves a Telemetry Host\-Initiated log page from an NVMe device
• nvme-tls-key(1) — Manage NVMe TLS PSKs
• nvme-toshiba-clear-pcie-correctable-errors(1) — Reset the PCIe correctable errors count to zero.
• nvme-toshiba-vs-internal-log(1) — Retrieve a Toshiba device\*(Aqs vendor specific internal log and either save to file or dump the contents.
• nvme-toshiba-vs-smart-add-log(1) — Retrieve a Toshiba device\*(Aqs vendor specific extended SMART log page contents and either save to file or dump the contents.
• nvme-transcend-badblock(1) — Retrieve Transcend NVMe device\*(Aqs bad blocks.
• nvme-transcend-healthvalue(1) — Use NVMe SMART table to analyze the health value of Transcend device.
• nvme-verify(1) — Send an NVMe Verify command, return results
• nvme-virtium-save-smart-to-vtview-log(1) — Periodically save smart attributes into a log file (csv format).
• nvme-virtium-show-identify(1) — Show a complete detail of identify device information in json format.
• nvme-wdc-cap-diag(1) — Retrieve WDC device\*(Aqs diagnostic log and save to file.
• nvme-wdc-capabilities(1) — Display WDC plugin command capabilities
• nvme-wdc-clear-assert-dump(1) — Clears the assert dump (if present).
• nvme-wdc-clear-fw-activate-history(1) — Clears the firmware activate history table.
• nvme-wdc-clear-pcie-correctable-errors(1) — Clears the pcie correctable errors field returned in the smart\-log\-add command.
• nvme-wdc-cloud-SSD-plugin-version(1) — Display WDC plugin Cloud SSD Plugin Version
• nvme-wdc-cloud-boot-SSD-version(1) — Display WDC plugin Cloud Boot SSD Version
• nvme-wdc-cu-smart-log(1) — Send NVMe WDC cu\-smart\-log Vendor Unique Command, return result
• nvme-wdc-drive-essentials(1) — Retrieve WDC device\*(Aqs drive essentials bin files and save to a tar file.
• nvme-wdc-drive-log(1) — Retrieve WDC device\*(Aqs drive log and save to file.
• nvme-wdc-drive-resize(1) — Send NVMe WDC Resize Vendor Unique Command, return result.
• nvme-wdc-enc-get-log(1) — Send NVMe WDC enc\-get\-log Vendor Unique Command, return result.
• nvme-wdc-get-crash-dump(1) — Retrieve WDC device\*(Aqs crash dump.
• nvme-wdc-get-dev-capabilities-log(1) — Send NVMe WDC get\-dev\-capabilities\-log plugin command, return parsed log output
• nvme-wdc-get-drive-status(1) — Send the NVMe WDC get\-drive\-status command, return result
• nvme-wdc-get-error-recovery-log(1) — Send NVMe WDC get\-error\-recovery\-log plugin command, return parsed log output
• nvme-wdc-get-latency-monitor-log(1) — Display latency monitor log page data in human readable format
• nvme-wdc-get-pfail-dump(1) — Retrieve WDC device\*(Aqs pfail crash dump.
• nvme-wdc-get-unsupported-reqs-log(1) — Send NVMe WDC get\-unsupported\-reqs\-log plugin command, return parsed log output
• nvme-wdc-id-ctrl(1) — Send NVMe Identify Controller, return result and structure
• nvme-wdc-log-page-directory(1) — Retrieves the list of Log IDs supported by the drive
• nvme-wdc-namespace-resize(1) — Resizes the device\*(Aqs namespace.
• nvme-wdc-purge(1) — Send NVMe WDC Purge Vendor Unique Command, return result
• nvme-wdc-purge-monitor(1) — Send NVMe WDC Purge\-Monitor Vendor Unique Command, return result
• nvme-wdc-vs-cloud-log(1) — Send NVMe WDC vs\-cloud\-log Vendor Unique Command, return result
• nvme-wdc-vs-device-waf(1) — Calculates the device write amplification factor and prints both TLC and SLC results
• nvme-wdc-vs-drive-info(1) — Send the NVMe WDC vs\-drive\-info command, return result
• nvme-wdc-vs-error-reason-identifier(1) — Retrieve WDC device\*(Aqs telemetry log error reason identifier field
• nvme-wdc-vs-fw-activate-history(1) — Execute NVMe WDC vs\-fw\-activate\-history Vendor Unique Command, return result
• nvme-wdc-vs-hw-rev-log(1) — Send NVMe WDC vs\-hw\-rev\-log Vendor Unique Command, return result
• nvme-wdc-vs-internal-log(1) — Retrieve WDC device\*(Aqs internal firmware log and save to file.
• nvme-wdc-vs-nand-stats(1) — Send NVMe WDC vs\-nand\-stats Vendor Unique Command, return result
• nvme-wdc-vs-smart-add-log(1) — Send NVMe WDC vs\-smart\-add\-log Vendor Unique Command, return result
• nvme-wdc-vs-telemetry-controller-option(1) — Disable/Enable the controller initiated option of the telemetry log page.
• nvme-wdc-vs-temperature-stats(1) — Display temperature\-related statistics
• nvme-write(1) — Send an NVMe write command, provide results
• nvme-write-uncor(1) — Send an NVMe write uncorrectable command, return results
• nvme-write-zeroes(1) — Send an NVMe write zeroes command, return results
• nvme-zns-changed-zone-list(1) — Retrieve Changed Zone log for the given device
• nvme-zns-close-zone(1) — Closes one or all zones
• nvme-zns-finish-zone(1) — Finishes one or all zones
• nvme-zns-id-ctrl(1) — Send NVMe Zoned Command Set Identify Controller, return result and structure
• nvme-zns-id-ns(1) — Send NVMe Zoned Command Set Identify namespace, return result and structure
• nvme-zns-offline-zone(1) — Offlines one or all zones
• nvme-zns-open-zone(1) — Opens one or all zones
• nvme-zns-report-zones(1) — Retrieve and display the Report Zones data structure
• nvme-zns-reset-zone(1) — Resets one or all zones
• nvme-zns-set-zone-desc(1) — Set extended descriptor data for a zone
• nvme-zns-zone-append(1) — Send an NVMe write command, provide results
• nvme-zns-zone-mgmt-recv(1) — Zone Management Receive command
• nvme-zns-zone-mgmt-send(1) — Zone Management Send command