tlp-stat(8)
| tlp-stat(8) | Power Management | tlp-stat(8) |
NAME
tlp-stat - view power saving status
SYNOPSIS
tlp-stat [options] [-- CONFIG_PARAM=value ... ]
DESCRIPTION
View configuration, system information, kernel power saving tunables and battery data. Invocation without options shows all information categories.
OPTIONS
System Operation
- -s, --system
- View system information and TLP status.
- -m, --mode
- Print currently active TLP profile.
Configuration
- -c, --config
- View active configuration.
- --cdiff
- View the difference between defaults and user configuration.
- -- CONFIG_PARAM=value ...
- Append configuration parameters to a command. These temporarily override the system configuration during execution of that command only and are not kept afterwards. Disclaimer: this feature exists for the sole purpose of test automation during TLP's development. It is provided as is and there is no support whatsoever.
Power Saving
- -d, --disk
- View disk device tunables.
- -e, --pcie
- View PCIe device tunables. Add -v to see device runtime status.
- -g, --graphics
- View graphics card tunables. Add -v to see power state and clocks of AMD GPUs.
- -p, --processor
- View processor tunables. For clarity the standard output shows only cpu0. Add -v to see all cpus. Add -q to see cpu driver state only.
- -r, --rfkill
- View radio device states and tunables. Add -v to see NetworkManager and rfkill details.
- -u, --usb
- View USB device tunables. Add -v to see device runtime status.
Battery Care
- -b, --battery
- View battery data and battery care features supported by your hardware. Add -v to see battery voltages (if available).
Information
- -q, --quiet
- Omit version header and show less information in the processor category.
- -t, --temp
- View temperatures and fan speed. Add -v to see all individual sensors.
- -v, --verbose
- Show more information in the battery, graphics, PCIe, processor, temperature, wireless and USB categories.
- --version
- Print TLP version.
Diagnostics and Debugging
- --pd-diag
- View tlp-pd diagnostics.
- -P, --pev
- Monitor power supply udev events.
- --psup
- View power supply diagnostics.
- -T, --trace
- View trace output for tlp and tlp-pd.
- --trace-nm
- View trace output correlated with NetworkManager journal.
- --udev
- Check if udev rules for power source changes and connecting USB devices are active.
- -w, --warn
- View warnings about SATA disks.
AUTHORIZATION
Many (but not all) tlp-stat commands require root privileges.
FILES
/etc/tlp.conf
System-wide user configuration file, uncomment parameters
here to override default settings and customization files below.
/etc/tlp.d/*.conf
System-wide drop-in customization files, overriding
defaults below.
/usr/share/tlp/defaults.conf
Intrinsic default settings. DO NOT EDIT this file,
instead use one of the above alternatives.
/run/tlp/run.conf
Effective settings consolidated from all above files. DO
NOT CHANGE this file, it is for reference only and regenerated on every
invocation of TLP.
SEE ALSO
tlp(8), tlpctl(8).
- TLP documentation: <https://linrunner.de/tlp>
- Battery care specifics: <https://linrunner.de/tlp/settings/bc-vendors.html>
BUGS
Report bugs to: <https://github.com/linrunner/TLP/issues>.
AUTHOR
(c) 2026 Thomas Koch <linrunner at gmx.net>
| 2026-05-04 | TLP 1.10.1 |